raulo© Power Unit P Hydraulq© Hand Pump Our High Pressure Hydraulic Hand Pump P/N 3165-000C features a 1.3 gallon (5 liter) aluminum tank and is used to efficiently fill a hydraulic circuit with fluid filtered to 5 microns, and also to increase the pressure of this fluid up to 5,000 PSI (345 BAR), all with minimum pollution emission. The high pressure oil outlet is equipped with a female quick coupling that connects to a hose which then connects to a TG6000X. No tools are necessary for any of these connections. The tank inlet includes a filter that can be sealed with a leak proof plug, convenient for the transportation of the unit. The hydraulic pump is supplied with a lever that can be dismantled. The Hydraulic Power Unit P/N 1008-002-1 was originally designed at Aerospatiale’s request to replace the hydraulic generator of a helicopter when its engines are turned off. It functions as an alternative power source to adjust settings during periodical controls such as: checking retractable landing gear, adjusting automatic pilot, among other operations. The unit is equipped with a pressure regulator to precisely adjust settings between 0-3,000 PSI (0-207 BAR). An HP external filter has also been added to the power unit for outmost endurance. A quick coupling is built-in for rapid and convenient connections to a Digital TG6000X. It is delivered ready-to use with its set of accessories including High and Low pressure hoses, and adapters and is equipped with a brake system, detachable towing handle and 4 anti-corrosion, wheels. The Nitrogen Booster P/N 1094-001C is a device used to “boost” the output of partially filled nitrogen tanks to as much as 4,000 PSI (276 BAR) without an external power source. The P/N 1094-001C only requires that the partiallyfilled tank possess a minimum pressure of 533 PSI (37 BAR). Note that the booster’s factory preset output is 3,200 PSI (221 CL Compatible with Eurocopter AS350/EC130, AS355 Eurocopter P/N 355A91004101 Efficient and reliable, the “Diabolo” twin-wheel unit P/N 2023-00 is easy enough to be handled by a single person or in a hangar and attaches itself effortlessly onto the helicopter’s skid. Its hydraulic system is designed to allow the lifting and shifting of helicopters equipped with a skid landing gear consisting of a total maximum weight of 2.1 tons (1,950 kg) without strenuous effort. Its dimensions and light weight make the unit portable and easy to carry in the trunk when necessary. wm m 'ajaj'ol Our complete line of accessories are made in-house using only the highest quality in raw materials. We offer a wide range of hoses, swivel connectors, nitrogen tank adapters, valves, pressure regulating components and everything in between. In addition we are fully capable of customizing each order per request. (Such as lengths, fittings, pressure ranges, etc.) A broad selection of hoses are available from High Pressure Nitrogen and Oil (MIL-H-3232/5606 and Skydrol), to low pressure purge hoses, all equipped with a variety of fittings. Florida Aeronautics Inc. is an original equipment manufacturer (OEM) of aircraft ground support equipment (GSE). We specialize in hydraulic, pneumatic, and oleo-pneumatic systems intended to service all types of civil, commercial and military aircraft. Florida Aeronautics pioneered many of the maintenance equipment technologies used throughout the aviation industry. The company was originally founded in Cannes, France in 1974 as Societe d’Etudes et de Fabrications Aeronautiques (SEFA). Under SEFA, ^ J we began designing various air/hydraulic tool kits, helicopter skis, M ground handling wheels, among other components, all of which have Pilot, Engineer, Inventor and Original Founder: been endorsed by Eurocopter Marignane, ATR and Dassault. We M Fernandez continue to perform extensive research and analysis on our products to ensure continued excellence, and we maintain very competitive pricing for such advanced technology. Our headquarters moved to the United States in 1996 in order to provide faster, more affordable service to our global clients and partners. Most importantly, Florida Aeronautics is able to customize maintenance units to your specific requirements, and we provide satisfactory warranty coverage and technical support on all of our products. Our products allow you to service your aircrafts thoroughly, resulting in their long lasting and satisfactory performance, and we continue to supply spares and repair components from our former S.E.F.A. tool kits and skis. For more information on our product listings, feel free to contact us at: Tel: 954-970-7814 Fax: 954-970-5205 Email: [email protected] Address: 4100 North Powerline Road, Suite A4 - Pompano Beach, Florida 33073 USA

For over a decade, our TG6000 Series has exhibited unrivaled performance by assuring four crucial advantages to aircraft maintenance technicians: Safety Quality Simplicity Precision The TG6000X replaces the following components traditionally required to complete daily maintenance tasks up to 6,300 PSI (435 BAR), thus reducing costs, clutter, connections, and leaks. Pressure Regulator 3-way Control Valve Pressure Gauge (0-6,300 PSI) Pressure Gauge Connectors Purge Valve This multifunctional device incorporates years of research, experience in the industry and our most advanced technical designs....