CUSTOMER: Standard SPECIFICATION NO: 354 SUBJECT: Towable dispenser Page 1 Flightline Support Limited Lakeside Industrial Park Cotswold Dene Standlake Oxfordshire OX29 7PL www.fsluk.com Tel +44 (0) 1993 776564 Fax +44 (0) 1993 778953 Similar unit

CUSTOMER: Standard SPECIFICATION NO: 354 SUBJECT: Towable dispenser Page 2 Specification for a Towable Aircraft Refuelling Hydrant Dispenser General description. The Hydrant Dispenser is of lightweight construction and is designed to be towed or manoeuvred manually over short distances at slow speed. It is fitted with a ball type towing coupling and parking brake. The Dispenser is fitted with a braked rear axle and a turntable mounted unbraked front axle to which is attached the tow bar. The axles are fitted with independent rubber suspension units and wheels fitted with 155 x 13 pneumatic tyres....

CUSTOMER: Standard SPECIFICATION NO: 354 SUBJECT: Towable dispenser Page 3 hinged top fill lid with coarse mesh strainer and a 20mm gravity drain valve terminating in a Kamlock adaptor & drip cap. Thermal pressure relief & depressurising system. The filter vessel is fitted with a pressure relief valve set to relieve at 10 bar. A spring close type manually operated system depressurising valve is located at the control station. Pipework. Main pipework is constructed in Schedule 10 - 304 grade stainless steel with stainless steel flanged joints. Small bore pipework including gauge lines, sense lines...

CUSTOMER: Standard SPECIFICATION NO: 354 SUBJECT: Towable dispenser Page 4 Stowage for the intake coupling. Stowage for two 9Kg type BC dry powder fire extinguishers. Stowage for two nitrogen cylinders. Sample cabinet. Test, documentation and certification. The cart will be fully flow and pressure tested. A certified test report will be provided. The filter vessel and hoses will be provided with the relevant documentation. A superstructure handbook with operating and maintenance instructions and circuit drawings clearly identifying all components will be provided. Paint. The cart will be finish...

CUSTOMER: Standard SPECIFICATION NO: 354 SUBJECT: Towable dispenser Page 5 Major Components 1. Intake coupling – 2½” AVERY HARDOLL CCMY6253 industrial type hose unit with CCMY6 dust cap, FSL 90° elbow with lifting handle and TODO 6026-1407 lightweight swivel joint.. The coupling will mate with a pit valve terminating in an A.S.A. type 2 ½” industrial tank unit. 2. Intake hose – ELAFLEX aviation type HDC – 6m long x 80mm bore with SPANNLOC end fittings 3. Intake swivel – FTL 80mm aluminium type 4. Deadman valve – FSL 80mm disc type with pneumatic opening and self closing actuator. 5. Filter Water...

CUSTOMER: Standard SPECIFICATION NO: 354 SUBJECT: Towable dispenser Page 6 16. Visi-flow indicator - FSL 17. Depressurising valve – APOLLO ½’’ self closing ball valve 18. Fuel recovery tank – FSL fully draining stainless steel type with hinged fill lid and coarse mesh screen 19. Closed circuit fuel sampler – ALJAC 4 litre type with valve for accepting the Shell water detector syringe & capsule, hinged lid and gravity drain valve into thre fuel recovery tank. 20. Closed circuit fuel sampler fill valve – APOLLO ½’’ self closing ball valve 21. Drain / sample valve – ¾’’ ball valve 22. Drip cap –...