FD70CV
14Pages

Document Number: Revision Date: 06/19/2012 Page 1 of 14 Installation and Operation Manual © 2015 Flight Display Systems. All Rights Reserved. TECHNICAL SUPPORT 470-239-7421 or FlightDisplay.c

Document Number: Revision Date: 06/19/2012 Page 2 of 14 © 2006 Flight Display Systems. All Rights Reserved. Flight Display Systems 6435 Shiloh Road Alpharetta, GA 30005 470-239-7400 Phone 678-867-6742 Fax sales@FlightDisplay.com www.FlightDisplay.com For the most current copy of all product manuals, please visit our website at www.FlightDisplay.com © 2015 Flight Display Systems. All Rights Reserved. TECHNICAL SUPPORT 470-239-7421 or FlightDisplay.

Document Number: Revision Date: 06/19/2012 Page 3 of 14 © 2015 Flight Display Systems. All Rights Reserved. TECHNICAL SUPPORT 470-239-7421 or FlightDisplay.com

Document Number: Revision Date: 06/19/2012 Page 4 of 14 General Information The FD70CV-M is the latest version of our popular 7” Widescreen LCD. The all metal case is designed for installation in light jets, turboprops and piston aircraft. This unit is ideal in situations where bulkhead space forward and aft is very limited. This unit is a full function 7-inch LCD housed in a metal case that will fit on most aircraft. The metal case makes it easy to mount directly to the bulkhead or build the units into the cabinet wall. Mounting holes are easily accessible on both sides of the unit. Front...

Document Number: Revision Date: 06/19/2012 Page 5 of 14 Specifications Display Type Supported Resolutions Display Brightness Contrast Ratio Dimensions LCD Dimension Weight Viewing Angle Power Operating Temperature PC Video Input Standard Video Input Video Type Supported Screen Control Remote Control Materials DO-160 Testing 7” TFT Color LCD 640x480 ~ 1024x768 450 cd/ m2 500:1 6.80”(W) x 4.75”(H) x 1.20”(D) 6.00”(W) x 3.60”(H) 1 lb 5 oz 140°/120° 12VDC @ .6 Amps 28VDC @ .3 Amps 0-50° C (32-122° F) VGA (Analog RGB 15 pin D-sub) 2 Composite Video NTSC, PAL On-Screen Display Menu IR, included...

Document Number: Revision Date: 06/19/2012 Page 6 of 14 Power This is a 12-28VDC monitor that requires 0.3 Amps (@28V) to 0.6 Amps (@12V) of power to operate. Video Wiring Suggestions All shields should be grounded to the connector at the source, and floating at the display. Avoid routing video wiring parallel to:  Strobe wiring DC motor supply cables Inverter cabling Or any other potential noise source. S-Video/Composite and Audio Wiring Recommended cable for s-video/composite and audio purposes is PIC 75 Ohm Coax, P/N V75268. This is a lightweight, flexible, and low signal loss cable...

Document Number: Revision Date: 06/19/2012 Page 7 of 14 VGA Wiring Recommended cable for VGA purpose is ECS P/N 453005. This is a single shielded cable containing 5 separate coaxial cables, color-coded to match the functions of the wires. We recommend coax cables be terminated using solder sleeve coaxial cable terminators such as Raychem Part Number CWT-4174-W122-5/9. © 2015 Flight Display Systems. All Rights Reserved. TECHNICAL SUPPORT 470-239-7421 or FlightDisplay.com

Document Number: Revision Date: 06/19/2012 Page 8 of 14 Power and Ground Wiring 22 AWG wire is recommended for Power and Ground applications. Power/Video Pin out for P1 (High Density DB-15 Receptacle) Connector Crimp Contacts Description 12-28VDC Power 12-28VDC Ground N/C Composite Video 1 - Signal Composite Video 1 - Shield N/C Composite Video 2 - Signal Composite Video 2 - Shield Red Video (Pin 1 on Standard VGA) Green Video (Pin 2 on Standard VGA) Blue Video (Pin 3 on Standard VGA) Red Ground (Pin 6 on Standard VGA) Green Ground (Pin 7 on Standard VGA) Horizontal Sync (Pin 13 on Standard...

Document Number: Revision Date: 06/19/2012 Page 9 of 14 Operation Instructions The FD70CV-M is continuously on but can be de-energized by removing power from the entertainment system. No pilot or aircrew action is necessary during flight or ground operation. Passengers can change the video output from the FD70CV-M using the video source select switch on the LCD monitor, or remotely throughout the cabin with the included IR remote. Monitor Control Buttons Press to turn the monitor on if currently off. Hold to turn the monitor off. Press to switch between sources. Press to increase the value...

Document Number: Revision Date: 06/19/2012 Page 10 of 14 Technical Drawing © 2015 Flight Display Systems. All Rights Reserved. TECHNICAL SUPPORT 470-239-7421 or FlightDisplay.com

Document Number: Revision Date: 06/19/2012 Page 11 of 14 Troubleshooting VGA Shadowing Most of shadowing problems are due to shielding on the wire. Locate the point where all of the shields are connected. Cut away the shields, one at a time, while viewing the display on the screen to observe which shield is causing the noise. Cutting away one shield at a time will allow you to focus and isolate the video noise issue. • Twisted pair wiring is prone to video noise. ECS VGA Wire (Detailed under “Video Wiring Suggestions”) is recommended. Snow or Sweeping Lines Lines that slowly sweep up and...

Document Number: Revision Date: 06/19/2012 Page 12 of 14 Technical Support Should you have any questions concerning this product or other Flight Display Systems products, please contact our Product Support representatives at (470) 239-7421. Flight Display Systems 6435 Shiloh Road Alpharetta, GA 30005 Phone: 470-239-7400 Fax: 678-867-6742 Email: sales@FlightDisplay.com For further product information, technical data and sample wiring diagrams, please click on the Dealers section of our web site at www.FlightDisplay.com Instructions for Continued Airworthiness The FD70CV-M is designed not to...

Document Number: Revision Date: 06/19/2012 Page 13 of 14 Limited Warranty All Flight Display Systems (FDS) products are warranted to be free from material or manufacturing defects for a period of 24 months from the date of shipment for General Aviation customers or 12 months from the date of shipment for Government/Special Mission customers. Any material or repair workmanship for in warranty repair service will be specifically warranted for 90 days or the remainder of the original warranty period, whichever is longer. If the original warranty period has expired, the 90 day repair warranty...