FISCHER CORE SERIES ALULITE™
32Pages

FISCHER CORE SERIES ULTRALIGHT | RUGGED | HIGHLY CONFIGURABLE 50% lighter than brass equivalent Over 10,000 mating cycles Wide range of colors for visual coding

PLUGS CABLE MOUNTED RECEPTACLES PANEL FRONT MOUNTED PANEL REAR MOUNTED This catalog covers our standard connector solutions. For specific requests, including hybrid or custom connectors, please contact your loca

FISCHER CORE SERIES ALULITE™ PLUGS1 CABLE MOUNTED BODY STYLES Locking system Push-pull Quick-release Push-pull Quick-release Design Standard Standard Short/Overmolding Short/Overmolding PANEL FRONT MOUNTED BODY STYLES D Design Rear-projecting BODY STYLES DBPU Design Rear-projecting Front-projecting All dimensions and images shown are in millimeters and are for reference only. See full color selection in part numbering sections (pages B 8-7, B 8-9, B 8-11).

Body styles FISCHER CORE SERIES ALULITE™ CABLE MOUNTED Other body styles available on request.

Technical dimensions FISCHER CORE SERIES ALULITE™ PLUGS CABLE MOUNTED S/SC BODY STYLES SS/SSC BODY STYLES 11 Weight shown is without cable clamp set, overmolding or heat shrinking. 2) Max. cable diameter below shield. All dimensions and images shown are in millimeters and are for reference only.

Part numbering FISCHER CORE SERIES ALULITE TM PLUGS The configurator is designed for multipole contact blocks only. For coax or triax blocks, please contact us. Clamp nut For standard body length plugs (S) : ■ 11 = Standard clamp nut, no bend relief. (See pages B 8-19 to B 8-23) For shortened body length plugs (SS) : ■ 13 = For heat shrinking / boots ■ 14 = For injection / overmolding Housing color 1) Housing treatment 1231 = Black (chromium) 1411 = Blue (anodized) 1611 = Red (anodized) 1731 = Grey (chromium) S = Standard body length ■ SS = Shortened body length Connector style Locking...

Body styles FISCHER CORE SERIES ALULITE TM RECEPTACLES PANEL MOUNTED Body Style Colored housing Design Electrical & contact configurations, page B2-24 Front-projecting Assembly Sealing categories, page A8 Crimp Contacts References to detailed information Body styles, chapter B1-2 Other body styles availabl

Technical dimensions FISCHER CORE SERIES ALULITE™ BODY STYLES BODY STYLES 11 Weight includes nut. 21 In the 102 Series only, the thread does not go all the way to the flange but stops 8 mm away. For panels thinner than 8 mm, spacers are available.

Part numbering FISCHER CORE SERIES ALULITE TM RECEPTACLES Housing The configurator is designed for multipole contact blocks only. For coax or triax blocks, please contact us. Housing treatment 1231 = Black (chromium) 1411 = Blue (anodized) 1611 = Red (anodized) 1731 = Grey (chromium) If ‘No sealing level‘ chosen in section BC, leave field blank. Options possible if you selected ‘Sealed (IP68) even unmated‘ or ‘Hermetic‘ : ■ 11 = Viton ■ 12 = EPDM (low temperature) D = Flush (vs. panel) Front-mounting receptacle If no sealing level is desired, leave field blank. Other options possible : ■ EU...

Technical dimensions FISCHER CORE SERIES ALULITE™ DBPU/DBPE BODY STYLES DBPLU/DBPLE BODY STYLES 11 Weight includes nut. 2) Pin length and diameter vary according to contact configuration. Contact us for more information. 3) For information on nutdrivers ( ), see Tooling page B 8-29. * - Pin for PCB contacts versions; all Series. - Tag for solder contact versions; Series 103 to 107. - Barrel for solder contact versions; Series 102. B8 - 10 Tech nical Specifications

Part numbering FISCHER CORE SERIES ALULITE TM RECEPTACLES PANEL REAR MOUNTED Contact blocks The configurator is designed for multipole contact blocks only. For coax or triax blocks, please contact us. Nut type Housing material Housing treatment All dimensions and images shown are in millimeters and are for reference only. Contact type Contact configuration Connector size U = Sealed (IP68) even unmated E = Hermetic Fischer Connectors can not be held liable for small color variations that may appear from one batch to another. Sealing level Keying code DBP = Flush (vs. panel) Rear-mounting...

FISCHER CORE SERIES ALULITE™ Electrical & contact configurations 11 Wire gauge stranding values are in brackets. 2) For a given AWG, the diameter of some stranded conductor designs could exceptionally be larger than the hole diameter of the barrel. Testing may be required. 3) Current per contact at 40°C temperature rise measured on the basic curve according to IEC 60512-5-2-5b. For the max. operating current a reduction factor must be used and limitations due to the size of the wires and the permissible upper temperature limit of the materials employed must be taken into account. See page...

Electrical & contact configurations FISCHER CORE SERIES ALULITE™ ALULITE 11 Wire gauge stranding values are in brackets. 2) For a given AWG, the diameter of some stranded conductor designs could be larger than the hole diameter of the barrel. Testing maybe required. 3) Current per contact at 40°C temperature rise measured on the basic curve according to IEC 60512-5-2-5b. For the max. operating current a reduction factor must be used and limitations due to the size of the wires and the permissible upper temperature limit of the materials employed must be taken into account. See page A13 for...

FISCHER CORE SERIES ALULITE™ Electrical & contact configurations 11 Stranding values are in brackets. 2) For a given AWG, the diameter of some stranded conductor designs could be larger than the hole diameter of the barrel. Testing may be required. 3) Current per contact at 40°C temperature rise measured on the basic curve according to IEC 60512-5-2-5b. For the max. operating current a reduction factor must be used and limitations due to the size of the wires and the permissible upper temperature limit of the materials employed must be taken into account. See page A13 for details. 4)...