Series 3242 ... BX4

Product catalog summary

Overview: This document provides technical specifications and operational guidelines for the Brushless DC-Servomotors Series 3242 ... BX4, featuring 4 Pole Technology with a power output of 45 W and a torque of 53 mNm.

Specifications:

Nominal Voltage: Ranges from 12V to 48V across different models.
Terminal Resistance: Varies from 0.92 Ω to 15.1 Ω depending on the model.
Efficiency: Maximum efficiency is approximately 78% for most models.
No-load Speed: Approximately 5,500 to 5,600 min^-1.
Stall Torque: Ranges from 251 mNm to 280 mNm.
Torque Constant: Varies from 20.7 mNm/A to 83.7 mNm/A.
Operating Temperature Range: -40°C to +100°C for the motor, with a maximum permissible winding temperature of +125°C.
Shaft Bearings: Preloaded ball bearings.
Material: Stainless steel housing.
Mass: 179 g.

Performance Characteristics:

Rated Torque: Approximately 41.8 mNm across models.
Rated Speed: Around 4,500 min^-1.
Thermal Resistance: Rth1/Rth2 is 2.3/11.6 K/W.
Thermal Time Constant: τw1/τw2 is 13/880 s.

Operational Guidelines:

The diagram provided indicates recommended speed in relation to available torque at an ambient temperature of 22°C.
Operating points above the nominal voltage curve require higher voltage, while those below require less.

Connection Options:

Motors are available with single wires or ribbon cables with connectors.
Temperature range for wires is up to 150°C.

Accessories and Combinations:

Compatible with various controllers, gearheads, encoders, and drive electronics.
Refer to the “Accessories” chapter for more details.

Notes: Specifications are subject to change without notice. For detailed technical data and lifetime performance, refer to the “Technical Information” section.

Catalog excerpts

Rated values are calculated with nominal voltage and at a 22°C ambient temperature. The Rh2 value has been reduced by 25%. Note: The diagram indicates the recommended speed in relation to the available torque at the output shaft for a given ambient temperature of 22°C. The diagram shows the motor in a completely insulated as well as thermally coupled condition (Rth2 50% reduced). The nominal voltage (Un) curve shows the operating point at nominal voltage in the insulated and thermally coupled condition. Any points of operation above the curve at nominal voltage will require a higher operating voltage. Any points below the nominal voltage curve will require less voltage. For notes on technical data and lifetime performance © DR. FRITZ FAULHABER GMBH & CO. KG refer to "Technical Information". Specifications subject to change without notice.

Open the catalog to page 1

FAULHABER Dimensional drawing Option, cable and connection Product combination Precision Gearheads / Lead Screws Drive Electronics SC 2402 P SC 2804 S SC 5004 P SC 5008 S MCBL 3002 P MCBL 3002 S MCBL 3003 P MCBL 3006 S MCBL 3002 P AES MCBL 3002 S AES MCBL 3003 P AES MCBL 3006 S AES MC 5004 P MC 5004 P STO MC 5005 S MC 5010 S Cables / Accessories MBZ To view our large range of accessory parts, please refer to the "Accessories" chapter. For notes on technical data and lifetime performance © DR. FRITZ FAULHABER GMBH & CO. KG refer to "Technical Information". Specifications subject to change without...

Open the catalog to page 2

Series 3242 ... BX4

Series 3242 ... BX4

Catalog excerpts

All FAULHABER Drive Systems catalogs and technical brochures

Archived catalogs