Catalogs >
FAULHABER Drive Systems >
Series 0615 ... S

Series 0615 ... S
2Pages

Catalog excerpts

FAULHABERDC-Micromotors Precious Metal Commutation Rated values are calculated with nominal voltage and at a 22°C ambient temperature. The Rh2 value has been reduced by 0%. Note: The diagram indicates the recommended speed in relation to the available torque at the output shaft for a given ambient temperature of 22°C. The diagram shows the motor in a completely insulated as well as thermally coupled condition (Rth2 50% reduced). The nominal voltage (Un) curve shows the operating point at nominal voltage in the insulated and thermally coupled condition. Any points of operation above the curve at nominal voltage will require a higher operating voltage. Any points below the nominal voltage curve will require less voltage. For notes on technical data and lifetime performance refer to "Technical Information". Edition 2021 Apr. 27 © DR. FRITZ FAULHABER GMBH & CO. KG Specifications subject to change without notice. www.faulhaber.com

Open the catalog to page 1

Dimensional drawing Bearing lubrication Temperature range For vacuum of 10-5 Pa @ 22°C Extended temperature range (-30…+125°C) Ø 0,8 mm x 4,5 mm Motor with rear end shaft for combination with Encoder PA2-50 Motor with rear end shaft for combination with Encoder HXM3-64 Second shaft end Encoder combination Encoder combination Product combination Precision Gearheads / Lead Screws Encoders Drive Electronics Cables / Accessories To view our large range of accessory parts, please refer to the “Accessories” chapter. For notes on technical data and lifetime performance refer to “Technical...

Open the catalog to page 2

Series 0615 ... S 2Pages

Catalog excerpts

All FAULHABER Drive Systems catalogs and technical brochures

Series 0615 ... S
2Pages