DC-MicromotorsPrecious Metal Commutation Series 1319 ... SR Rated values for continuous operation Rated values are calculated with nominal voltage and at a 22°C ambient temperature. The Rh2 value has been reduced by 0%. Note: The diagram indicates the recommended speed in relation to the available torque at the output shaft for a given ambient temperature of 22°C. The diagram shows the motor in a completely insulated as well as thermally coupled condition (Rth2 50% reduced). The nominal voltage (Un) curve shows the operating point at nominal voltage in the insulated and thermally coupled condition. Any points of operation above the curve at nominal voltage will require a higher operating voltage. Any points below the nominal voltage curve will require less voltage. For notes on technical data and lifetime performance © DR. FRITZ FAULHABER GMBH & CO. KG refer to "Technical Information". Specifications subject to change without notice.

Dimensional drawing Options Example product designation: 1319T012SR-277 Option L 4924 X4924 4925 X4925 Y4925 F 277 Twin Leads Twin Leads Twin Leads Twin Leads Twin Leads Twin Leads Single Leads Bearings For motors with twin leads (PVC), length 150 mm, red (+) / black (-) For motors with twin leads (PVC), length 300 mm, red (+) / black (-) For motors with twin leads (PVC), length 600 mm, red (+) / black (-) For motors with twin leads (PVC), length 150 mm, red (+) / black (-), with connector AMP 179228-2 For motors with twin leads (PVC), length 300 mm, red (+) / black (-), with connector AMP 179228-2...