System Data Sheet EOS P 770

Product catalog summary

Overview: The document provides detailed information about the EOS P 770 Laser Sintering System, designed for high-throughput manufacturing of large parts. It highlights the system's capabilities, technical specifications, and material options.

Specifications:

Build Volume: 700 mm x 380 mm x 580 mm (27.6 x 15 x 22.9 in).
Laser Type: CO₂, 2 x 70 W.
Build Rate: Up to 32 mm/h (1.3 in/h); up to 10.5 l/h.
Layer Thickness: Ranges from 0.06 mm to 0.18 mm.
Scan Speed: Up to 2 x 10 m/s (32.8 ft/sec).
Power Consumption: Typical 3.1 kW; maximum 12 kW.

Features:

Enhanced productivity with up to 20% improvement over previous models.
Optimized temperature management and improved recoating speed.
High laser accuracy with improved digital scanners.
EOSAME feature for homogenized energy input and excellent mechanical properties.
Spot pyrometer for continuous temperature control.

Materials: The system supports 10 commercial polymer materials and 18 combinations of materials/layer thicknesses, including Alumide, PA 1101, PA 2200, and others.

Software and Accessories:

Software includes EOS ParameterEditor, EOSAME, EOS RP Tools, and more.
Optional accessories include CoolDown Station, IPCM P, and unpacking and sieving station.

Installation and Dimensions:

System Dimensions: 2,250 mm x 1,550 mm x 2,100 mm (88.6 x 61 x 82.7 in).
Recommended Installation Space: Minimum 4.8 m x 4.8 m x 3.0 m (189 x 189 x 118 in).
Weight: Approximately 2,300 kg (5,071 lb).

Contact Information: EOS GmbH and its various international offices are listed for further inquiries.

Catalog excerpts

Polymer Solutions Laser Sintering System with Two Lasers for the Production of Large Parts and for Industrial High-Throughput Manufacturing e-Manufacturing Solutions

Open the catalog to page 1

With the largest build volume available on the market, the EOS system enables the production of parts of up to one meter in length. Thanks to its new hardware and software features, the EOS P 770 is up to 20% more productive than its predecessor. High productivity with low cost per part and homogeneous part properties • Thanks to optimized temperature management, improved recoating speed and high-power lasers, the build time and cost per part are reduced significantly. • The improved digital scanners achieve a considerably higher laser accuracy compared to the previous version of the system....

Open the catalog to page 2

All EOS GmbH Electro Optical Systems catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list