TECHNICAL DATA SHEET CRRBiSO™ Q Carbiso™ C IM56P-03/10 and C IM56L-03/10 products are chopped, recycled carbon fibres recovered via a modified pyrolysis process. This lower cost alternative to chopped virgin fibre enables weight saving via improved mechanical properties in engineering plastics. These products are made from reclaimed Intermediate modulus fibres and chopped to the target fibre length. The fibres have no sizing - giving excellent compatibility and dispersibility with a range of matrices. Applications include: thermoplastic compounding and cement reinforcement. HEALTH AND SAFETY Refer to Material Safety Data Sheet ELG Carbon Fibre certifies that our recycled carbon fibre products are compliant with the European Union Regulation (EC) 1907/2006 governing the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) and do not contain substances above 0.1% weight of a Substance of Very High Concern (SVHC) listed in Annex XIV. Advised precautions for safe handling are general PPE (gloves, safety googles, mask and protective clothing). Important notice: data and information provided in the data sheet represent typical properties. The user have the right to make their own assessment for the appropriate purpose and will benefit from technical support from ELG CF if required.

Due to the low bulk density of this product, special processing equipment is required for bulk handling in extrusion applications. Configurations which have been successfully demonstrated include: 1. Low bulk density feeder, into a densifier/crammer (mounted vertically on the extrusion line). 2. Low bulk density feeder, into a modified side-feeder. For further details on suppliers for the above equipment and tailored processing guidelines, please contact the relevant Technical Service Engineer. Table 1 - Mechanical data of compounded Carbiso™ C IM56P-03/10 with PA6* CARBISO™ C IM56P-03/10 WEIGHT...