Regolo Perimeter System

Nulite’s Regolo Perimeter System is modular in design. The slender profile is ideal for highlighting textured walls in corridors, offices, lobbies and general purpose rooms. The light module is designed for field constructed perimeter slots. If necessary, Nulite can provide back boxes compatible with Grid, Flange or Mud Ring applications. Back boxes are available in custom lengths, telescoping and corners. Our system is designed to provide a perimeter lighting effect with an efficacy up to 106 lumens per watt. Stretto Optics™ Add some visual impact on your next project by revealing unique textured...

For a general perimeter highlighting solution, use our wide distribution option. This creates a halo effect which adds visual separation between the ceiling and the walls. Wide Distribution Cat. # RZ4-07L35-...-N-...-4’ “Stretto Optics" Wattage - 30.6 Lumens/Watt - 100.3 Continuous Run of RZ4-07L35-...-N-... Maintained fc (LLF = 0.85) Avg. 42 - Max. 123 - Min. 11.6 - Max/Min. 10.6 Reflectances: 80/50/20 Calculated values include direct and inter-reflected values. Actual results may vary from this point-by-point calculation.

Key Features of the Light Module Cold rolled steel housing finished with white powder coat paint after fabrication Actual Size Actual Size Plug-in wire connector(s) between units for continuous runs LED array attached to an extruded aluminum heat sink finished with black (white for wide distribution) powder coat paint after fabrication Screw for 10o field adjustment Layout Recommendations Recessed Slot Nulite recommends a minimum of 1” end gap between the luminaire and the end of the slot. Minimum slot length is 2’. We provide submittal drawings for each run length. Our standard gap is 3” per...

Standard Mounting (Slot by Others) J-Box, Structure and Fasteners, by Others. Finished Sheetrock Slot By Others. Recommended Min. 4-1/2” / Max. 5-1/2” Typical Applications It’s very important to design the slot to conceal the luminaire from view. Critical sight-lines can be in adjacent environments through glazing or openings. Base Mount option allows for the light engine to be positioned to uplight a vertical s

Optional Back Box Mounting Step 1 (Flange or Mud Ring) Aircraft Cable Support Bracket for Flange & Mud Structure Step 2 Fasteners by Others Aircraft Cable Secure Bracket to Structure, by Others Step 3 Slide Provided Mounting Clip Through Housing Slot and Secure Slide Back Box into Place and Secure Step 4 Use Clips to Secure to Channel or T-bar Open, Secure and Close Housing to Back Box via Supplied Hardware Install Luminaire in Back Box These are general installation instructions. Please refer to our website for instructions on the specific mounting options.

Grid / Flange / Mud Ring Details Grid Ceiling Slot Back Box Back box hardware and support structure, by others. Back box and grid brackets provided by Nulite. Use “BB” option code to receive prior to luminaires. Mud Ring Slot Back Box Textured Surface Back box and A.C. supports provided by Nulite, mounting hardware and structure by others. Use “BB” option code to receive prior to luminaires. Flange Slot Back Box Max. 6” Back box and A.C. supports provided by Nulite, mounting hardware and structure by others. Use “BB” option code to receive prior to luminaires. 1-3/8” Metal Channel Stud by others....

Regolo Perimeter System Nulite’s Regolo Perimeter System is modular in design. The slender profile is ideal for highlighting textured walls in corridors, offices, lobbies and general purpose rooms. Housing Construction: The housing is formed cold rolled steel painted after fabrication. Secure housing to structure by appropriate fasteners by others. The optional Grid, Flange or Mud Ring Back Box consists of visible extruded aluminum trim and cold rolled steel housing with heavy gauge end caps. Standard finish is white powder coat after fabrication. Trimless Slot (Standard Mounting) J-Box, Structure...