Catalog excerpts
AS7510 Joint System Coupling, ferrules and sleeve with elastomeric seals Our highly reliable products do much more than deliver superior performance — they also help customers meet changing regulations. Eaton originally designed fluid flexible joints in the early 2000s to comply with the Federal Aviation Administration's updated Federal Aviation Regulation regarding fuel tank safety. Eaton's products are certified compliant with FAA regulations requiring high-current flexible joint systems (FAR 23.954, 25.901, 25.954 and 25.981) and include multiple design features that comply with FAR 25.981 for fuel tank ignition prevention. Designed for aircraft and engine fluid systems, the AS7510 flexible joint system connects adjacent low-pressure fluid tubes by enclosing a sleeve, O-rings, and fixed-cavity ferrules. This effectively creates a pressure seal and an electrical continuity path to the sleeve and each of the adjacent ferrules. Each flexible joint system consists of a coupling, two ferrules, a sleeve and two O-ring seals. The system is designed for ducting tube sizes 0.5" to 4.0" and operates within the temperature range of -65 to +265°F (-53 to 129°C) at 130 psi (896 kPa). Eaton's products are the basis for the AS7510 specification initially released in 2017 Features: • Fuel ignition prevention and structural redundancies compliant with FAR 25.981 • Qualified for various aircraft system loads: shear, tension and dynamic (see AS7510 for specifics) • Lightweight, flexible coupling is ideal for aerospace fuel systems • Allows four degrees of angulation per joint • No installation tooling required • Lightning qualified Materials: • Couplings: Aluminum 2024 • Ferrules: Aluminum 2024 • Sleeves: Aluminum 2024 • O-ring seals: Consult AS7511 • For specific material call out, refer to AS751X part specifications Eaton designs and manufactures products similar in style to the AS7510 and offers additional sizes, materials and features not covered by AS7510. To learn more about our product offerings, please contact an Eaton representative.
Open the catalog to page 1
Values are derived from AS751X documents for a AS7513 ferrule, AS7514 sleeve, AS7515 coupling and AS7511 for O-ring dash numbers *Also available as butt welded ferrules, AS7516. F;T*I\I Powering Business Worldwide AS751X A_ DD Size code, tube size (inches), see AS751X Material code letter Basic AS751X part number Consult the corresponding AS751X component documentation Eaton Aerospace Group Fluid & Electrical Distribution Division 300 S East Ave, Jackson, MI 49203 (517) 787-8121 For technical inquiries: JXNMITechSupport@Eaton.com For pricing inquiries: QuotesJXNMI@Eaton.com © 2021 Eaton All...
Open the catalog to page 2All EATON SAS catalogs and technical brochures
-
AE24626 Pages
-
666/66732 Pages
-
601/AE7012 Pages
-
TF100 35D60 Pages
-
TF100 34E8 Pages
-
Carter® Ball Valve4 Pages
-
Centurion® Brush Seal2 Pages
-
AE645 PTFE Reinforced8 Pages
-
Centurion™ Brush Seal2 Pages
-
Vickers ® AC Motorpump4 Pages
-
Carter ® Nozzle Ball Valve4 Pages
-
Bell/Boeing V-22 Osprey8 Pages
-
Eurofighter Typhoon8 Pages
-
Boeing C-17 Transport8 Pages
-
Boeing CH-478 Pages
-
Sikorsky UH-60 Black Hawk8 Pages
-
Aerospace8 Pages
-
Engine solutions4 Pages
-
72022 Pages
-
71002 Pages
-
39-0001-11002 Pages
-
91212 Pages
-
200262 Pages
