SBL Elevated Stop Bar Light
2Pages

{{requestButtons}}

Catalog excerpts

SBL Elevated Stop Bar Light - 1

SBL Elevated Stop Bar Light Compliances: FAA AC 150/5345-46: L-862S Applications The SBL fixture is used for runway incursion protection and traffic control on taxiways just before active runways. It is required for SMGCS operations during low visibility conditions as defined in FAA AC 150/5340 and AC 120-57A. This unidirectional light is designed for use in all weather conditions with any kind of control system including the Digitrac® Control and Monitoring System. Features ■ ETL Certified ■ Uses PK-30d low power consumption lamp ■ Easy to install - mounts on a standard 2-inch (50 mm) mounting pipe with frangible coupling ■ Mounting pipe extension included ■ Easy to relamp - special tools are not required ■ Cast aluminum housing ■ Easy to aim ■ Traffic signal red lens -eliminates need for separate filter ■ Light head shipped fully assembled with lead assembly ■ Control and Monitoring -Fixture can be supplied with a Crouse-Hinds Logitrac for individual lamp control and monitoring as required for flashing guard light operation or stop bar control. Contact Crouse-Hinds for more info Ordering Information How to Order: To the basic catalog number, add the height. A breakable coupling is required for proper mounting and is supplied with the fixture. Order base plate separately. Example: 862S-14 is a red stop bar light 14-inches high. Fixture Type:- Standard Height 14 inches Available in 2-inch increments to 26 inches. Typical Photometric Data 8

Open the catalog to page 1
SBL Elevated Stop Bar Light - 2

Accessories Description Aiming Device (Optional) Base L867, Class I, 24' Deep Baseplate, 2' Hub, 12' Diameter Connector Kit L-823, 8 AWG, 0.32' to 0.43' O.D. Heat Shrink Kit (1-piece) Heat Shrink Kit (2-piece) Isolation Transformer Catalog Number 50133 AC21242H200301 AP1932 823KP-D4-D4 10047-2154 10047-1425 See Transformer Section Shipping Weight lb. kg. 2.0 0.91 Shipping Volume cu. ft. cu. m. 0.13 0.004 Part Number Renewal Parts Description Part Number Frangible Pipe Extension (See Table 1) 50306 - X Lead Assy., 6.6 A, (See Table 1) 50307 - X Lens, Traffic Signal Red...

Open the catalog to page 2

All EATON CROUSE-HINDS catalogs and technical brochures

  1. PRO III TCL

    2 Pages

  2. PRO APF MIRL

    2 Pages

  3. PRO III TOL

    2 Pages

  4. PRO III SBGL

    2 Pages

  5. PRO APF AGS

    16 Pages

  6. AGS-LED

    4 Pages

  7. REIL-LED

    1 Pages

  8. AV07

    2 Pages

  9. AV-LC

    1 Pages