4E RS, RSM and RSS Junction Boxes Conduit Hub Plates and Gaskets Applications: RS, RSM, RSS junction boxes are installed in conduit systems to: • Act as pull box for conductors • Provide openings and space for making splices and taps in conductors • Provide for branch conduit runs • Provide access to conductors for maintenance and future system changes Features: • Junction box bodies accept wide range of hub plates permitting varied hub arrangements and sizes • Stocking a few components provides for many specific needs • Future system expansion easily accomplished by substituting hub plates for currently installed plates • Suitable for use where boxes with integral hubs cannot satisfy requirements • Suitable for surface mounting outdoors or indoors in rigid conduit runs Junction Boxesf Approximate Inside Dimensions Size Cat. # Certifications and Compliances: • UL Standard: 514A • CSA Standard: C22.2 No. 18 Standard Materials: • Bodies and hub plates - Feraloy® iron alloy • Gaskets - cork Standard Finishes: • Feraloy iron alloy - electrogalvanized and aluminum acrylic paint Replacement Cover Gaskets Size Cat. # Conduit Hub Plates^ For 81/2 x 4 inch Sides of RS and RSM Boxes One Two Three Size Cat. # Cat. # Cat. # Replacement Hub Plate Gaskets □ □ Size Cat. # Size Cat. # For 41/2 x 4 inch Sides of RSM and RSS Boxes Type Cat. # For 41/2 x 4 inch Sides of RSM and RSS Boxes Type Cat. # fincludes body, top cover with gasket, 4 gaskets for side plates, and 20 bolts. ^Hub plates only. Gaskets not included. For conduit liner ordering information, see page 860. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business