Catalogs >
EATON CROUSE-HINDS >
REIL Runway End Identifier Lights

REIL Runway End Identifier Lights
2Pages

Catalog excerpts

REIL Runway End Identifier Lights Compliances: FAA/AC 150/5345-51; L-849 A,B,E,F ICAO Annex 14 Applications The primary application of a REIL system is to positively identify the end or the threshold of a visual or instrument nonprecision runway. This REIL system consists of two synchronized flashing lights. One flasher unit is located at each side of the runway threshold. Features ■ ETL Certified ■ CSA Certified ■ Easy to install - each REIL unit consists of a flash head and a control box, mounted on the same support leg(s). ■ Easy to maintain - special tools are not required. ■ Does not require separate control cabinet - REIL Master Unit with integral system control. ■ Elapsed time meter ■ Safety interlock in each control box and flash head. ■ Weather resistant - painted parts are coated with U.V. resistant paint, electrostatically applied Note: Each current (series circuit) operated REIL must be powered by a dedicated 4kW (minimum) constant current regulator. Ordering Information How to Order: To the Basic Catalog Number, add the symbols for FAA Style and Input Power, as shown below. Add Option numbers as required. Fixture Type: Beam Orientation: 4 = Omni Directional (FAA Style B,F) 8 = Uni Directional (FAA Style A,E) Input Type: 1 = Voltage operated with internal (SC 415) controller** 3 = Current (series) operated*** Voltage* (Input Type 1 Only):- 240 = 240 V. 60 Hz 230 = 230 V. 50 Hz * For optional 120 V, 60 Hz consult factory ** For optional current sensing control of the voltage operated REIL, also order FTC-435 Controller and (1) 30/45W isolation transformer *** For current operation two 300W isolation transformers and connector kit are required. FTS SERIES products are manufactured by Flash Technology, Franklin, TN. Technical Data Instruction Manua: FTS 400/800 FTS 430/830 Primary Power: Voltage Unit, 240VAC +10% 60Hz / 230VAC +10% 50Hz , 1 Phase Current Unit, Direct connect to secondary of standard FAA type L830 Isolating Transformer: 120 Watts (High) 85 Watts (Med) 65 Watts (Low) 300 Volt Amperes (High Intensity) Effective Intensity: Style A, E = 20,000, 2000, 450 effective candelas. Style B, F = 300 ± 50%, 1,500 ± 5% and 5,000 ± 5% effective candelas Flash Rate: 60 Flashes per minute (400) 120 Flashes per minute (800) Beam Pattern: Omnidirectional coverage: 360 degrees horizontal, 8 degrees vertical Unidirectional coverage: 30 degrees horizontal, 10 degrees vertical Home Office: United States - +1 860-683-4300 International Offices: Canada • China • Dubai • Mexico • Brazil

Open the catalog to page 1

FTS 4 Series Co-Mounted Omni Directional Renewal Parts Description Part Number Shipping Weights and Volumes REIL Catalog Number FTS 4 Series FTS 8 Series Shipping Weight lb. kg. 29 13.1 Shipping Volume cu. ft. cu. m.

Open the catalog to page 2

REIL Runway End Identifier Lights 2Pages

Catalog excerpts

All EATON CROUSE-HINDS catalogs and technical brochures

REIL Runway End Identifier Lights
2Pages