Catalogs >
EATON CROUSE-HINDS >
PRO III TOL

PRO III TOL
2Pages

Catalog excerpts

Runway and Taxiway Inset Lights PRO III™ TOL L-852 Omnidirectional Taxiway Light Compliances: FAA AC 150/5345-46: L-852T & E ICAO Annex 14 UFC 3-535-01 IEC 97/98A/DTS Applications The TOL is an inset taxiway edge and taxiway intersection fixture. The TOL is intended for use on a 6.6A constant current circuit through an L-830 isolation transformer. Features ■ ETL Certified (As listed in Table 1) ■ Low profile, <.25" (6 mm) -FAA Style 3 ■ High-strength aluminum optical assembly ■ Easy to maintain - no sealant required for prism or feedthrough assembly replacement ■ Pressure test plug for seal integrity verification ■ It is recommended that caution be used during snowplow operations. Use of a rubber tipped blade is recommended. Fixture is not warranted against snowplow damage. Fixture Type: Color:- T = Taxiway Edge (Omni-Directional Blue) E = Taxiway Intersection (Omni-Directional Yellow) Fixture Diameter:- 008 = 8" Fixture with mounting bolt pattern per IEC specifications 12A = 12" Fixture with 11.25" mounting BC 12B = 12" Fixture with 10.25" mounting BC

Open the catalog to page 1

Dimensions: Inches (mm) Instruction Manual: 2528 Typical Photometric Data INNER IANS 13001 OUTER LENS BOOT INNER COVER INNER LENS — FILTER O-RING — OPTICAL HOUSING ASSEMBLY WITH 1-823 PLUG |NOt SHOWN) LAMP ASSEMBLY Item Description 12' Diameter Shallow Base - Aluminum 8' Diameter Shallow Base - Aluminum Base: L867B, Class 1,24' Deep Base: L868B, Class 1,24' Deep Connector Kit - L823, 8 AWG Catalog Number 21238-X 21431-X See Bases Section See Bases Section 54 Super-D4-D4 Item Description Heat Shrink Kit - 1 Piece Heat Shrink Kit - 2 Piece Isolation Transformer Catalog Number...

Open the catalog to page 2

PRO III TOL 2Pages

Catalog excerpts

All EATON CROUSE-HINDS catalogs and technical brochures

PRO III TOL
2Pages