PRO III™ SBGL L-852GS Inset Stop Bar / Runway Guard Light Compliances: FAA AC 150/5345-46: L-852 G and L-852S Applications The SBGL fixtures are used for runway incursion protection and traffic control on taxiways just before active runways. They are required for SMGCS operations during low visibility conditions as defined in FAA AC 150/5340-30 and AC 120-57A. This unidirectional light is designed for use in all weather conditions with any kind of control system including the Digitrac® Control and Monitoring System. Fixture Type:- GS = L-852/S, Stop bar/Runway guard light Color Filters*: - YR =Yellow (Left side)/Red (Right side) YX =Yellow (Left side)/Blank (Right side) XR =Blank (Left side)/Red (Right side) L-823 Plug Connection: P1 = One Plug P2 = Two Plugs Features ■ ETL Certified ■ Low profile, < .25" (6 mm) -FAA Style 3 ■ High-strength forged aluminum ■ Low power consumption ■ Few parts to stock ■ Easy to maintain - no sealant required for prism or feed-through assembly replacement ■ Pressure test plug for seal integrity verification ■ Long lamp life - Quartz Halogen, 105 W ■ Control and Monitoring -Fixture can be supplied with a Crouse-Hinds Logitrac for individual lamp control and monitoring as required for flashing guard light operation or stop bar control. Contact Crouse-Hinds for more info

Outline Drawings Instruction Manual: Shipping Weight: Shipping Volume: INNER COVER O-RING LAMP BRACKET ASSEMBLY INNER COVER INNER COVER O-RING LAMP BRACKET ASSEMBLY INNER COVER Typical Photometric Data 100 CANDELA MINIMUM REQUIRED 1000 CANDELA AVERAGE REQUIRED 500 CANDELA MINIMUM REQUIRED 30 CANDELA MINIMUM REQUIRED 300 CANDELA AVERAGE REQUIRED 150 CANDELA MINIMUM REQUIRED VERTICAL ANGLE VERTICAL ANGLE L-852G Runway Guard Light-Yellow Accessories Item Description Catalog Number Base L-868B, Class I*, 24˝ Deep See Bases Section Connector Kit – L-823, 8AWG, 0.32˝ to 0.43˝ O.D. 823KP-D4 -D4 Heat...