Runway and Taxiway Inset Lights PRO APF Series L-852 TCL-LED (L) Taxiway Centerline Light Compliances: FAA: AC 150/5345-46: Current Edition FAA: EB67 Current Edition ICAO Annex 14 Vol. 1 and Part 4 NATO: STANAG 3316 RoHS and CE Applications The L-852 TCL is a taxiway centerline light that is used primarily as a ground traffic aid during periods of low visability to guide aircraft between the runway and the parking stand. The TCL is usually a yellow or green bidirectional light. Ordering Information Fixture Type: Features ■ ETL Certified ■ New Wavetrac™ technology reduces power consumption up to 80% compared to incandescent ■ Long life LED technology with rated projected life greater than 50,000h at 6.6A ■ Dust and water tight to IP 68 ■ Modular design makes fixtures easy to maintain with fewer parts to stock ■ Engineering Brief 67 current edition compliant dimming curve ■ High frequency 400Hz PWM helps eliminate flicker perception ■ Compatible with all known CCR types ■ 3.5 Crest factor ensures compatibility with Series CCRs ■ 10kV/5kA surge protection ■ -40C to +85C operating temperature ensures safe movement of aircraft in the most challenging locations ■ Failure monitoring of fixtures ■ 0.88 second switch-on time - Narrow CAT II = Wide CAT II - Narrow CAT III = Wide CAT III Curved CAT II = Curved CAT III Series Version: - (J & K Left Toe Bi-Directional)* Y = Yellow G = Green Color Side B: ■ IEC Style 3, 6-13mm low protusion housing ■ Low Profile, < .25" (6.35mm) -FAA Style 3 ■ Optional arctic kit (patent pending) ■ Typical initial fixture turn on voltage of 1.5V (J & K RightToe Bi-Directional)* Y = Yellow G = Green N = No Light Source Specification: - F1 = FAA Fixture Dimension: 8F = 8" Fixture with 12" FAA Support Ring 8N = 8" Fixture, No Support Ring Beam Orientation: S = Straight (A/B/C/D Only) L = Left Toe-In (Unidirectional J/K Only) R = Right Toe-In (Unidirectional J/K Only) C = Curved (Bi-Directional J/K Only) Plug Options: - P1 = One plug P2 = Two plugs B1 = One plug, Lamp Bypass Enabled** Heater Options: 0 = No options 1 = Arctic kit Gasket Options: 0 = No options 1 = Optical Assembly to Support Ring Gasket Contact factory for other gasket sizing * Green/Yellow and Yellow/Green color combinations are only recognized by FAA for 852A and 852C fixtures. **A larger 65W transformer is recommended if this option is chosen. For Artic Kit a 100W transformer is recommended

Outline Drawings Photometric Data Power VA Power VA Power VA * Use 65W transformer with B1 Option. ** Use 10W/15W transformer on each side with P2 Option *** Use 30W/45W in place of 10W/15W, 65W in place of 20W/25W and 100W in place of 65W with the Arctic Kit Option. Accessories & Renewal Parts Item Description Catalog Number Item Description Catalog Number Lens & Blank Lens Socket Replacement Kit 852C 21642-C Power Supply Replacement Kit 21645-1 Power Supply Replacement Kit with Arctic Kit Support Feed-through Assembly -1 Lamp, 1 Connector Gasket - Bottom Cover, Style III O-Ring,...