Guidance Signs PRO APF AGS-LED, FAA (L) Airside™ Guidance Sign FAA Compliances: FAA: AC 150/5345-44 Current Edition: L858 FAA: EB67 Current Edition Applications PRO APF AGS LED FAA Airside™ signs model are designed for use on airport taxiways to mark taxi routes and intersections. Colors may be black on yellow, yellow on black, or white on red depending on the application as defined by Ithe govering standard FAA AC 150/5345-44 and EB 67. Black Signs with white numerals are used to indicate distance remaining in thousands of feet of runway. Features ETL Certified LED bars are used in all types of guidance signs Operating temperature: –40°C to +55°C Uses long life LED technology with 50,000h projected lifetime Stainless steel fasteners used for improved weather resistance Frangible coupling installed on concrete foundation meets FAA requirements Power factor > 0.95 across all steps Compatible with Eaton CrouseHinds Series CLD Logitrac devices Ordering Information How to Order: To determine the exact number of modules to fit your message, contact Crouse-Hinds. Order isolation transformer, transformer housing, coverplate and gasket or baseplate, and connector kit separately. The colors of the sign faces and the legends must be specified for each sign. Multiple messages and colors may appear on a sign face. Model: AP1 = PRO APF Product Generation Size: 1 = Taxiway Sign, 12” Legend Height 2 = Taxiway Sign, 15” Legend Height 3 = Taxiway Sign, 18” Legend Height 4 = Distance Marker, 40” Numeral Height 5 Distance Marker, 25” Numeral Height = Number of Faces: S = Single Face D = Double Face Number of Sign Modules: 10 = 1 Module 15 = 1.5 Module 20 = 2 Module 25 = 2.5 Module 30 = 3 Module 35 = 3.5 Module* Exterior Frame Color: B = Black Legend Panel Face Style: C = Continuous Panel Face M = Modular Panel Faces (Only available on signs larger than 1.5 module) Blank Panel Color: B = Black N = None - Double Sided Legend Sign Wind Velocity: 2 = 200 MPH (322km/h) = 300 MPH (483km/h) Leg Lengths: D = Legs for standard FAA Height Signs Power Options: L = Power Cable Through Leg Safety Options: 1 = On/Off Power Switch 2 = On/Off Power Switch with Switch Cover 3 = Safety Tether (2 tethers, 1 on each end per full module) 4 = Safety Tether (1 tether on each module; standard on FAA signs) * 3.5 Module Sign is the longest length offered, sign has been optimized for longest legend allowance by FAA Home Office: United States – +1 860-683-4300 International Offices: Canada • Ch

SIGN LENGTH "L" SEE TABLE (3.0 SINGLE POWER SUPPLY) (3.5 MULTIPLE POWER SUPPLY) VIEWABLE LENGTH "K" SEE TABLE Side View VIEWABLE HEIGHT "G" SEE TABLE NOMINAL SIGN HEIGHT "F" SEE TABLE NOMINAL INSTALLED HEIGHT "H" SEE TABLE DIM "D" DIST. FROM EDGE OF SIGN TO LEG SEE TABLE .030 [.76mm] A ACROSS ALL FLOOR FLANGES FLANGE WIDTH "W" SEE TABLE Part Number Where Used FAA Size 1 12” Legend Height FAA Size 2 15” Legend Height FAA Size 3 18” Legend Height

Showing Internal Power Option L Technical Data Electrical Ratings:   Dimensional Information Floor Flange 62451 Four Holes 0.600 (15.24) Diameter 2-2.5 x 8 NPSM Thread ThRU Shipping Weights and Volumes Modules 1 www.crouse-hinds.com/airportlighting Home Office: United States – +1 860-683-4300 International Offices: Canada • China • Dubai • Mexico

Accessories Description Part Number Base L-867, Class I, 24 inches deep AC21242HX00301* Baseplate, 2 inch Hub AP1932* Coverplate, 0.375 inches thick AK100006 Gasket for Coverplate 10530287 Isolation Transformer 100 watts, 6.6/6.6A TA10066D Isolation Transformer 200 watts, 6.6/6.6A TA200666 Primary L-823 Connector Kit 54 Super-D4-D4 Secondary Cable Assembly, 2 meters 95M-R8-G-2** * If the power leg is baseplate mounted directly on a base, only the AC21242HX00301 may be used with no gasket for the baseplate AP1932 to insure equal breakaway with the other legs. The base must be installed per the...