Catalog excerpts
Runway and Taxiway Inset Lights PRO APF Series 12” L-852 TCL-LED (L) Taxiway Centerline Light Compliances: FAA: AC 150/5345-46: Current Edition FAA: EB67 Current Edition NATO: STANAG 3316 Applications The L -852 TCL is a taxiway centerline light that is used primarily as a ground traffic aid during periods of low visability to guide aircraft between the runway and the parking stand. The TCL is usually a yellow or green bidirectional light. Features ETL Certified Wavetrac™ technology reduces power consumption up to 60% compared to incandescent Long life LED technology with rated projected life greater than 50,000h at 6.6A Dust and water tight to IP 68 Modular design makes fixtures easy to maintain with fewer parts to stock Engineering Brief 67 current edition compliant dimming curve High frequency 400Hz PWM helps eliminate flicker perception Compatible with all known CCR types 3.5 Crest factor ensures compatibility with Series CCRs 10kV/5kA surge protection -40C to +85C operating temperature ensures safe movement of aircraft in the most challenging locations Failure monitoring of fixtures IEC Style 3, 6-13mm low protrusion housing Low Profile, < .25˝ (6.35mm) – FAA Style 3 Optional arctic kit Ordering Information Fixture Type: A = Narrow CAT II B = Wide CAT II C = Narrow CAT III D = Wide CAT III J = Curved CAT II K = Curved CAT III Series Version: AP1 = ProAPF1 Color Side A (J & K Left Toe):* Y = Yellow G = Green N = No Light Source Color Side B (J & K Right Toe):* Y = Yellow G = Green N = No Light Source Specification: F1 = FAA Fixture Dimension: 12U = 12” Unibody (11.25 B.C.) Plug Options: P1 = One plug P2 = Two plugs B1 = One plug, Lamp Bypass Enabled** Heater Options: 0 = No options 1 = Arctic kit * Green/Yellow and Yellow/Green color combinations are only recognized by FAA for 852A and 852C fixtures. ** A larger 65W transformer is recommended if this option is chosen. For Artic Kit a 100W transformer is recommended
Open the catalog to page 1Instruction Manual: Shipping Weight: Shipping Volume: GRADE GROUND LEVEL 2.42 REF Photometric Data Power Factor at All Steps * Use 65W transformer with B1 Option. ** Use 10W/15W transformer on each side with P2 Option *** Use 30W/45W in place of 10W/15W, 65W in place of 20W/25W and 100W in place of 65W with the Arctic Kit Option. Accessories & Renewal Parts Item Description 12” 852A/B/D/J/K Green Module 12” 852A/B/D/J/K Yellow Module 12” 852C Green Module 12” 852C Yellow Module Lens & Blank Lens Socket Replacement Kit (A/B/C/J/K) Lens Replacement Kit - 852D Arctic Kit Replacement Kit...
Open the catalog to page 2All EATON CROUSE-HINDS catalogs and technical brochures
-
IAL Inset Approach Light
3 Pages
-
PRO III TCL
2 Pages
-
PRO APF MIRL
2 Pages
-
IALE Inset Approach light
3 Pages
-
PRO III TOL
2 Pages
-
PRO III SBGL
2 Pages
-
PRO III IRGL/ISBL
2 Pages
-
SBL Elevated Stop Bar Light
2 Pages
-
ERL Elevated Runway Light
2 Pages
-
PRO APF AGS
16 Pages
-
AGS-LED
4 Pages
-
AGSF-LED Sign (L)
4 Pages
-
REIL-LED
1 Pages
-
EAL Elevated Approach Light
3 Pages
-
ALSF Flasher System
2 Pages
-
AV07
2 Pages
-
PRO Command ALCMS
6 Pages
-
AV-LC
1 Pages
-
PRO APF Utility LED
2 Pages
-
UEL - UTILITY LED
2 Pages
-
W-Series Junction Boxes
9 Pages
-
Enclosure Accessories - Hubs
1 Pages
-
TCH Electric Clocks
1 Pages