Runway and Taxiway Inset Lights IRTEL Inset Runway Threshold/End Light Compliances: FAA AC 150/5345-46: L-850D Applications The IRTEL is a medium intensity bidirectional light (using one 48 W lamp for the green side and one 105 watt lamp for the red side). This fixture is used on runways where the threshold and end lighting are co-located and where it is impractical to use an elevated light. Features ■ ETL Certified ■ Low profile, < .50” (12mm) - FAA Style 2 ■ Low power consumption ■ Few parts to stock ■ Easy to maintain - no sealant required for prism replacement ■ Pressure test plug for seal integrity verification ■ Long lamp life - Quartz Halogen, 48 W, 6.6 A Quartz Halogen, 105 W, 6.6 A ■ High-strength forged aluminum Fixture Type: Color*: RG = Red/Green GR = Green/Red GX = Green/Blank XG = Blank/Green RR = Red/Red L-823 Plug Connection:- P1 = One plug P2 = Two plugs (Two color units only. Blank is not considered a color.) * Refer to the color symbol position: the red beam is always straight. RG means right toe-in of the green beam. GR means left toe-in of the green beam. GX means right toe-in of the green beam. XG means left toe-in of the green beam. Red Straight ! A CENTERLINE GREEN RIGHT TOE-IN GREEN LEFT TOE-IN

Outline Drawing O-RING LENS GASKET Instruction Manual: Shipping Weight: Shipping Volume: Typical Photometric Data 3,300 CD AVERAGE REQUIRED (ACTUAL AVERAGE = 4,489 CD SHOWN) 2,161 CD MINIMUM REQUIRED 2,500 CD AVERAGE REQUIRED (ACTUAL AVERAGE = 2,794 CD SHOWN) 1,554 CD MINIMUM REQUIRED 250 CD MINIMUM REQUIRED VERTICAL ANGLE CD = CANDELAS (GREEN LIGHT) L-850D Inset Runway Threshold/End Light – Green L-850D Inset Runway Threshold/End Light – Red Accessories Catalog Number Item Description Catalog Number Item Description Base: L-868B, Class I, 24˝ Deep* Isolation Transformer – 100 W, 6.6/6.6 A Isolation...