*myaeroexpo

Catalogs
EATON CROUSE-HINDS
IALE Inset Approach light

IALE Inset Approach light

Product catalog summary

Compliance and Specifications:
The IALE Inset Approach Light is designed to comply with FAA Specifications E-2952 and E-2968 for high-intensity approach lighting and MALSR applications. It meets photometric requirements as tested by ETL and complies with UFC 3-535-01 specifications.

Applications:
This semi-flush fixture is used in FAA high-intensity approach lighting systems, particularly in runway overrun pavements and other locations requiring low-profile fixtures. It is uni-directional, providing green light for thresholds, red for side row barrettes, and white for centerline barrettes and crossbars.

Features:

Low profile design at 0.50 inches (12 mm)
Minimal parts for stocking
Easy maintenance with no sealant required for prism
Pressure test plug for seal integrity verification
Long lamp life with Quartz Halogen, 105 W, 6.6 A

Fixture Types and Specifications:

850 = Runway
6 = Model 6
FAA Specifications: C52, C68, G52, G68, R52
UFC Specifications: GX1, GR2, RX1
L-823 Connection: P1 (One plug), P2 (Two plugs)

Photometric Data:
Typical photometric data is provided for various configurations, showing minimum candela requirements and performance across different angles.

Ordering Information:
Ordering codes are provided for different configurations based on FAA and UFC specifications.

Renewal Parts and Accessories:

Bottom Cover Assembly, Gaskets, Lamp, Lens Replacement Kits
Adaptor ring, Base, Connector Kit, Heat Shrink Kits, Lifting Tool, Isolation Transformer

Additional Information:
Includes dimensions, shipping weight, and volume, along with contact information for home and international offices.

Catalog excerpts

Approach & Navigational Aids IALE Inset Approach Light Compliances: Designed in accordance with FAA Specification E-2952 for high intensity approach lighting applications and FAA Specification E-2968 for MALSR applications. ETL tested to meet photometric requirements for FAA Specification E-2952 and E-2968. Complies with UFC 3-535-01 specification. Applications The Crouse-Hinds IALE semi-flush fixture is used in FAA high intensity approach lighting systems in the runway overrun pavement. They are also used at other locations beyond the overrun that require a low profile light fixture. The fixtures are uni-directional and provide applicable light beam colors of green for threshold, red for side row barrettes and white for centerline barrettes and crossbars. Features ■ Low profile, .50" (12 mm) ■ Few parts to stock ■ Easy to maintain - no sealant required for prism ■ Pressure test plug for seal integrity verification ■ Long lamp life - Quartz Halogen, 105 W, 6.6 A Home Office: United States - +1 860-683-4300 International Offices: Canada • China • Dubai • Mexico • Brazil Fixture Type: 850 = Runway 6 = Model 6 FAA Specifications:- GX1 = UFC 3-535-01, Green Straight, Blank, Unidirectional GR2 = UFC 3-535-01, Green Straight, Red Straight, Bidirectional RX1 = UFC 3-535-01, Red Straight, Blank, Unidirectional L-823 Connection: -

Open the catalog to page 1

Typical Photometric Data 8000 CD MIN. 10000 CD MIN. VERTICAL ANGLE VERTICAL ANGLE VERTICAL ANGLE VERTICAL ANGLE VERTICAL ANGLE HORIZONTAL ANGLE HORIZONTAL ANGLE

Open the catalog to page 2

Dimensions: Instruction Manual: Shipping Weight: Shipping Volume: Description Heat Shrink Kit - 1 Piece Heat Shrink Kit - 2 Piece Lifting Tool Isolation Transformer Part Number 10047-2154 10047-1425 19999 See Transformer Section AccessoriesDescription Part Number Adaptor ring, 15' base with 12' fixture 21151 Base: L-868B, Class I, 24' Deep* AC24242Q200303 Bottom Cover Assembly with power lead, -1= 1 lead -2 = 2 leads 21286-X Gasket - Bottom Cover 10035-33-273 Gasket Lubricant - 5.3 oz. Container 10048-25 Lens Replacement Kit - Green 21321-G** Lens Replacement Kit - White...

Open the catalog to page 3

IALE Inset Approach light

IALE Inset Approach light

Catalog excerpts

All EATON CROUSE-HINDS catalogs and technical brochures

Archived catalogs