Catalogs >
EATON CROUSE-HINDS >
IAL Inset Approach Light

IAL Inset Approach Light
3Pages

Catalog excerpts

Approach & Navigational Aids IAL Inset Approach Light Compliances: ICAO Annex 14: Figures A2-1, A2-2, A2-3, A2-4, A2-8 Ordering Information The IAL is an unidirectional inset approach light, inset threshold light and inset end light compliant to ICAO specifications. It is also a bidirectional ICAO threshold/ end fixture. Features Low profile, .50˝ (12 mm) Few parts to stock Easy to maintain – no sealant required for prism Pressure test plug for seal integrity verification Long lamp life – Quartz Halogen, 105 W, 6.6 A Table 1 ICAO Fixture L-823 Connection: P1 = One plug P2 = Two plugs (GR and RG units only) ICAO Figures: CS = Figure A2-1 – Clear, straight, unidirectional R2L = Figure A2-2 – 2 degree toe-left, red unidirectional R2R = Figure A2-2 – 2 degree toe-right, red unidirectional G3L = Figure A2-3 – 3.5 degree toe-left, green unidirectional G3R = Figure A2-3 – 3.5 degree toe-right, green unidirectional G2L = Figure A2-4 – 2 degree toe-left, green unidirectional G2R = Figure A2-4 – 2 degree toe-right, green unidirectional RS = Figure A2-8 – Red, straight, unidirectional GR* = G3L / RS – Bidirectional RG* = G3R / RS – Bidirectional GS = Green, straight, unidirectional Fixture Type: 850 = Runway 6 = Model 6

Open the catalog to page 1

Typical Photometric Data 1000 CD MIN. 2000 CD MIN. 10,000 CD MIN. 20,000 CD AVG VERTICAL ANGLE ICAO Fig. A2-1, 3 x 105W Lamp, White, Straight ICAO Fig. A2-2, 3 x 105W Lamp, Red, Toe-In (Toe Left Shown) VERTICAL ANGLE VERTICAL ANGLE ICAO Fig. A2-8, 1 x 105W Lamp, Red, Straight Home Ofﬁce: United States – +1 860-683-4300 International Ofﬁces: Canada • China • Dubai • Mexico • Brazil ICAO Fig. A2-4, 2 x 105W Lamp, Green, Toe-In (Toe Left Shown) ICAO Fig. A2-3, 2 x 105W Lamp, Green, Toe-In (Toe Left Shown) VERTICAL ANGLE

Open the catalog to page 2

Outline Drawing LENS O-RING LENS GASKET Instruction Manual: Shipping Weight: Shipping Volume: Accessories Description Part Number Part Number Base: L-868B, Class I Base* Connector Kit – L-823, 8 AWG, .32˝ to .43˝ O.D. Heat Shrink Kit – 1 Piece Heat Shrink Kit – 2 Piece Lifting Tool Primary Connector Kit, Resin Filled Isolation Transformer Renewal Parts Description Bottom Cover Assembly with Power Lead, -1 = 1 lead, -2 = 2 leads Gasket – Bottom Cover Lamp – 105 W, 6.6 A Part Number Lens Replacement Kit – Green Lens Replacement Kit – Red Lens Replacement Kit – White * Fixture with total lamp...

Open the catalog to page 3

IAL Inset Approach Light 3Pages

Catalog excerpts

All EATON CROUSE-HINDS catalogs and technical brochures

IAL Inset Approach Light
3Pages