2A Explosion Protected Disconnect Switches 10,20,40,80,125 and 180 Amp 600VAC Non-metallic Enclosure cCSAus Certified Cl. I, Div. 2, Groups A, B, C, D Cl. I, Zones 1 and 2, AEx de IIC, T6 Cl. II, Div. 1, Groups E, F, G (CSA) Cl. II, Div. 2, Groups F, G ATEX Approved Ex de IIC, T6, Zones 1 and 2, IP66 Applications: Explosion Protected Disconnect Switches are used in a metallic conduit or cable system for surface mounting to control motor, lighting, and other circuits and: • For individual motor control • Are used to prevent arcing internal to the enclosed switch from causing ignition of a specific hazardous atmosphere or atmospheres • Are designed for industrial areas such as chemical plants, oil and gas refineries, paint and varnish manufacturing plants, gasoline bulk loading terminals, and finishing areas where sturdy, durable enclosures are required Features: • Explosion protected factory sealed motor circuit switches. • Innovative break-line in cover allows full wiring access, making installation quick and easy. • High-impact enclosure is designed for excellent corrosion resistance and will not warp from hot or cold water. • Tongue-in-groove seal guarantees IP66 rating and eliminates possibility of accidental opening or leakage. • Lockable handle meets OSHA lockout/ tagout requirements. • Molded-in-place mounting feet provide a water channel between wall and enclosure. • Large rotary handle provides easy gripping with gloved hands. • Captive cover screws prevent water exposure and possible corrosion. Standard Materials: • Enclosure 10A: Impact-resistance thermoplastic 20A - 180A: Fiberglass-reinforced polyester Non-metallic, corrosion resistance Increased safety Ex-e protection Impact Resistance NEMA 4X, IP66 Protection Enclosure meets UL 94-V0 UV Rated • Enclosure Gasket - Silicon • Handle - Impact-resistant thermoplastic • Cover Screws - Stainless steel • Conduit Entries: Zinc Myers" Hubs Certifications and Compliances: • cCSAus Certified • Class I, Division 2, Groups A, B, C, D • Class I, Zones 1 and 2, AEx de IIC, T6 • Class II, Division 1, Groups E, F, G (CSA) • Class II, Division 2, Groups F, G • ATEX Approved - PTB • Ex de IIC, T6, Zones 1 and 2A, IP66 • GOST-R and GOST-K • CSA Standard: C22.2 No.14 • NEMA4X • IP66 Electrical Rating Ranges: _Horsepower Ratings:_ Switches: 240 VAC 600 VAC Copyright© 2013 Eaton’s Crouse-Hinds Business

cCSAus Certified Cl. I, Div. 2, Groups A, B, C, D Cl. I, Zones 1 and 2, AEx de IIC, T6 Cl. II, Div. 1, Groups E, F, G (CSA) Cl. II, Div. 2, Groups F, G ATEX Approved Ex de IIC, T6, Zones 1 and 2, IP66 Explosion Protected Disconnect Switches 10,20,40,80,125 and 180 Amp 600VAC Non-metallic Enclosure Switches can be mounted directly onto a wall. The optional wall mounting plate offers a more convenient method of mounting. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business

Explosion Protected Disconnect Switches 10, 20, 40, 80, 125 and 180 Amp 600VAC Non-metallic Enclosure cCSAus Certified Cl. I, Div. 2, Groups A, B, C, D Cl. I, Zones 1 and 2, AEx de IIC, T6 Cl. II, Div. 1, Groups E, F, G (CSA) Cl. II, Div. 2, Groups F, G ATEX Approved Ex de IIC, T6, Zones 1 and 2, IP66 Copyright© 2013 Eaton’s Crouse-Hinds Business

cCSAus Certified Cl. I, Div. 2, Groups A, B, C, D Cl. I, Zones 1 and 2, AEx de IIC, T6 Cl. II, Div. 1, Groups E, F, G (CSA) Cl. II, Div. 2, Groups F, G ATEX Approved Ex de IIC, T6, Zones 1 and 2, IP66 Explosion Protected Disconnect Switches 10, 20, 40, 80, 125 and 180 Amp 600VAC Non-metallic Enclosure Figure 8 - 125 Amp, 3 Pole 180 Amp, 3 Pole Figure 9 - 20 Amp, 3 Phase Variable Speed Figure 10 - 40 Amp, 6 Phase Variable Speed Figure 11 - 80 Amp, 3 Phase Variable Speed Copyright© 2013 Eaton’s Crouse-Hinds Business