Catalog excerpts
EAL Elevated Approach Light Compliances: FAA Specification FAA-E-982* ICAO Annex 14 CSA Certified Applications The EAL is a unidirectional elevated light which may be used as a clear or red approach light, a red end of runway light, and a green threshold light. For more information, refer to the Application/Fixture Selection Table on page 3.14. Features ■ Meets FAA photometric requirements, using standard PAR 56 lamps, as specified in FAA-E-982 document. ■ Suitable for replacement of MB-2 MILSPEC MIL-L-26990 lights per U.S. Air Force AFR 88-14. ■ Easy to install - mounts on a standard 2" EMT (50mm pipe) and a frangible coupling or approach mast mounted. ■ Sturdy filter clips - resist high winds and jet blasts. ■ Cast aluminum housing. ■ Easy to relamp - special tools are not required. ■ Easy to aim - uses precise aiming device** with digital readout. ■ Shipped fully assembled. Ordering Information How to Order: To the basic catalog number, add the symbols for Color, Lamp type, Cable Assembly and Options (if any). A frangible coupling may be required for proper mounting and must be ordered separately. Examples: 98240-C-200 is a clear approach light with a 200 watt lamp, less cable. 98240-G-300-20 is a green threshold light with a 300 watt lamp and 6.5' (2m) long 20 amp cable Fixture Type Light Color: C = Clear (No Filter or Clips) R = Red, Absorption Filter with Clips G = Green, Absorption Filter with Clips DR = Red, Dichroic Filter with Clips DG = Green, Dichroic Filter with Clips Lamp Type: 200 = 200 Watts, 6.6 Amp, PAR-56 300 = 300 Watts, 20 Amp, PAR-56 No symbol means no lamp is included Cable Assembly:- 20 = 6.5 Feet (2 meters) Long Cable, 20 Amp Rated, with L-823 Plug No symbol means a cable is not included Options:- 10 = Mounting Kit (consist of 61062-1 Frangible Coupling and 25003 Cable Clamp Assembly). 11 = Ground Wire 12 = External 6.6 Amp Cable 14 = Mounting Kit, fixture to baseplate * With Exception of the Weight. ** Order 50133 aiming device separately (one per facility).
Open the catalog to page 1Photometric Data 250 CD MINIMUM 500 CD MINIMUM 2,500 CD MINIMUM 5,000 CD AVERAGE (ACTUAL AVERAGE - 5,338 CD SHOWN) 2,000 CD MINIMUM 1,000 CD MINIMUM 10,000 CD MINIMUM 20,000 CD AVERAGE (ACTUAL AVERAGE - 22,038 CD SHOWN) VERTICAL ANGLE VERTICAL ANGLE HORIZONTAL ANGLE HORIZONTAL ANGLE APPROACH CENTERLINE & CROSS BAR WHITE LIGHT - 200 WATTS APPROACH SIDE ROW RED LIGHT - 200 WATTS CD = Candelas in white light 500 CD MINIMUM 1,000 CD MINIMUM 5,000 CD MINIMUM 10,000 CD AVERAGE (ACTUAL AVERAGE - 17,006 CD SHOWN) 500 CD MINIMUM 1,000 CD MINIMUM 5,000 CD MINIMUM 10,000 CD AVERAGE (ACTUAL AVERAGE -...
Open the catalog to page 2Shipping Weight: Shipping Volume Accessories Description Aiming Device Base L-867B, Class I, 24' Deep Base L-867D, Class I, 24' Deep Baseplate, 2' Hub, 12' Diameter Baseplate, 2' Hub, 16' Diameter Frangible Coupling with Compression Fitting Connector Kit L-823, 6 AWG, 0.32' to 0.43' O.D. Connector Kit L-823, 8 AWG, 0.32' to 0.43' O.D. Heat Shrink Kit (1-piece) Heat Shrink Kit (2-piece) Transformer Shipping Weight lb. kg. 52 87 8 14 Shipping Volume cu. ft. cu. m. 2.6 0.074 Renewal Parts Description #6-32 Captive Screw Bolt, Slipfitter Filter, Absorption Green Filter, Absorption...
Open the catalog to page 3All EATON CROUSE-HINDS catalogs and technical brochures
-
IAL Inset Approach Light
3 Pages
-
PRO III TCL
2 Pages
-
PRO APF MIRL
2 Pages
-
IALE Inset Approach light
3 Pages
-
PRO III TOL
2 Pages
-
PRO III SBGL
2 Pages
-
PRO III IRGL/ISBL
2 Pages
-
SBL Elevated Stop Bar Light
2 Pages
-
ERL Elevated Runway Light
2 Pages
-
PRO APF AGS
16 Pages
-
AGS-LED
4 Pages
-
AGSF-LED Sign (L)
4 Pages
-
REIL-LED
1 Pages
-
ALSF Flasher System
2 Pages
-
AV07
2 Pages
-
PRO Command ALCMS
6 Pages
-
AV-LC
1 Pages
-
PRO APF Utility LED
2 Pages
-
UEL - UTILITY LED
2 Pages
-
W-Series Junction Boxes
9 Pages
-
Enclosure Accessories - Hubs
1 Pages
-
TCH Electric Clocks
1 Pages