Technical data Three pole, miniaturised, aircraft style thermal circuit breaker with tease-free, trip-free, snap action mechanism and push/pull on/off manual actuation (M-type TO CBE to EN 60934). An indicator band on the push button clearly shows the tripped/off position. Threadneck panel mounted, available in metric and US (AS 14154) configurations. Advanced two-chamber design minimises contact contamination to provide fail-safe operation. Temperature compensated with optional auxiliary contacts, and fully approved for use on a wide range of aircraft and equipment. Various dummies are available without protective function, allowing connection of pre-installed wiring without loads. Aircraft systems and equipment (fixed wing and helicopters); other extra low voltage wiring applications; defence equipment; communications systems. Standard current ratings and typical volt drop values Approvals For further details please see: www.e-t-a.de/ti_e Voltage rating 3 AC 200 V (300 Hz to 800 Hz); DC 28 V Current rating range 1...30 A Typical life 20,000 operations mechanical 10,000 operations at IN (< 25 A) 4,000 operations at IN (30 A) Ambient temperature -55...+125 °C (-67...+257 °F) < 15 A -55...+90 °C (-67...+194 °F) > 15 A Insulation co-ordination rated impulse pollution (IEC 60664 and 60664A) withstand voltage degree 1.5 kV 3 Dielectric strength (IEC 60664 and 60664A) test voltage Insulation resistance > 100 MQ (DC 500 V) Interrupting capacity Icn 3 AC 200 V (400 Hz): < 4 A 1,000 A Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Vibration 10 g (57-2000 Hz), ± 0.76 mm (5-57 Hz) IEC 60068-2-6, test Fc, ISO 7137 Vibration (random) 16.4 g rms, 0.2 g2 Hz ± 1.5 dB, to VG 95210, sheet 29, IEC 60068-2-6, test Fc, ISO 7137 Acceleration 17 g, to ISO 2669 IEC 60068-2-27, test Ea, ISO 7137 Corrosion 96 hours at 5 % salt mist 48 hours at 20 % salt mist to VG 95210, sheet 2, IEC 60068-2-11, test Ka, ISO 7137 Humidity 240 hours at 95 % RH, to VG 95210, sheet 7, IEC 60068-2-3, test C/ISO 7137 Explosion to VG 95210, sheet 10, MIL-STD-202, meth. 109 Altitude < 25,000 m above sea level Mass max. 67 g with auxiliary contact max. 63 g without auxiliary contact Mass reduction through aluminium threadneck approx. 3 g

High Performance Thermal Circuit Breaker 583-... mounting holes ø3.2+0.15 .126+.006 current rating in A min. 50 min. 1.97 ø8.4 .331 black white lock washer teminal screw MS 51957-41 (8-32 UNC-2A) with lock washer MS 35338-137 tightening torque max. 1.2 Nm 583-G411-K1M1-A1S0TN (583-96-TC-K14) Metric threadneck M12x1 and terminal design -K14 (M4x6), listed by the German Materialamt der Bundeswehr to VG 95345 T11. 583-G533-J1M1-B2S0XN (AS 14154) Threadneck size 7/16-32UNSx6.4 and terminal design -J14 (inch thread 8-32), approved to AS 14154. Ordering information for approved devices ø8.4 .331 black...

High Performance Thermal Circuit Breaker 583-... 1000 Trip time in seconds teminal screw ISO 7045-M4x6 with lock washer DIN 137 B4 tightening torque max. 1.2 Nm max. 6.5 max .256 ø8.4 .331 black white lock washer Typical time/current characteristics Mounting instructions The devices must not be aligned in tightened state! There is a risk of permanent damage at the circuit mechanics and the housing may break! The devices must be countered during mounting on the threadneck! Internal connection diagrams with auxiliary contact EN 2996-004 line A2 with auxiliary contact VG 95345 T11 line A1 with polarized...

High Performance Thermal Circuit Breaker 583-... Accessories Splash cover/hex nut assembly with O ring (IP66 and IP67) (approved to VG 95345, part 23) X 200 801 08 nickel plated nut, transparent cover X 200 801 03 matt black finish nut, black cover X 200 801 09 matt black finish nut 7/16-32, black cover X 200 801 12 with blackened nut and transparent cover Splash cover black/hex nut assembly with O ring (IP54) only for threadneck nut M12 (to VG 95345, sheet 23) X 200 802 01 nickel plated nut X 200 802 02 matt black finish nut Actuator extension (black) to be fitted on the push button (approved...