Technical data Description Single pole, miniaturised, aircraft style thermal circuit breaker with tease-free, trip-free, snap action mechanism and push/pull on/off manual actuation (M-type TO CBE to EN 60934). An indicator band on the push button clearly shows the tripped/off position. Threadneck panel mounted, available in metric and US (MS 3320) configurations. Advanced two-chamber design contributes to fail-safe operation. Temperature compensated from -55 °C to +125 °C, with optional auxiliary contacts, and fully approved for use on a wide range of aircraft and equipment. Full specification ensures suitability for the most demanding applications. For three pole version see type 583. Aircraft systems and equipment (fixed wing and helicopters); other extra low voltage wiring applications; defence equipment; communications systems. Standard current ratings and typical volt drop values For further details please see: www.e-t-a.de/ti_e Voltage rating AC 115 V (300 Hz to 800 Hz); DC 28 V (higher voltage ratings upon request) Current rating range 1...35 A Typical life 20,000 operations mechanical or 10,000 operations at IN (< 25 A) 5,000 operations at IN (30 + 35 A) Ambient temperature -55...+125 °C (-67...+257 °F) Insulation co-ordination rated impulse pollution (IEC 60664 and 60664A) withstand voltage degree Dielectric strength (IEC 60664 and 60664A) test voltage main to aux. circuit AC 1,500 V Insulation resistance > 100 MQ (DC 500 V) Interrupting capacity Icn AC 115 V (400 Hz): 5 A 2,000 A 30 + 35 A 4,000 A Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Vibration (sinusoidal) 15 g (70-2000 Hz), ± 0.76 mm (5-70 Hz) to VG 95210, sheet 19, IEC 60068-2-6, test Fc/ISO 7137 Vibration (random) 16.4 g rms, 0.2 g2/Hz ± 1.5 dB IEC 60068-2-27, test Ea/ISO 7137 Corrosion 96 hours at 5 % salt mist, severity A 48 hours at 20 % salt mist, severity B to VG 95210, sheet 2, IEC 60068-2-11, test Ka/ISO 7137 Humidity 240 hours at 95 % RH, to VG 95210, sheet 7, IEC 60068-2-3, test C/ISO 7137 Explosion to VG 95210, sheet 10, MIL-STD-202, meth. 109 Altitude < 25,000 m above sea level Mass max. 29 g with auxiliary contact max. 25 g without auxiliary contact Weight reduction through aluminium threadneck: approx. 3 g

Ordering information Ordering information for approved devices Type No. 483 single pole, with temperature compensation Mounting G threadneck panel mounting, standard Threadneck design 1 M12x1x6.4x8.8 dia. with mounting plate (aux. contact version) 3 MJ12x6.4x8.8 dia. (without aux. contact) 4_ M12x1x6.4x8.8 dia. (without aux. contact) 5 7/16-32UNx6.4x7.8 dia. (without aux. contact) 6 M12x1x9.4x8.8 dia. (without aux. contact) Hardware for threadneck (washers) 0 without hardware 1 wave washer 12/15 - mounted 2 mounted washer 12.1/17.2 - mounted 3 mounted washer 11.3/14.9 - mounted (threadneck design...

mounting holes teminal screw ISO 7045-M4x6 with lock washer DIN 137 B4 tightening torque max. 1.2 Nm mounting holes current rating in A ø3.2+0.15 .126+.006 teminal screw ISO 7045-M4x6 with lock washer DIN 137 B4 tightening torque max. 1.2 Nm lock washer lock washer lock washer 8.5 .335 teminal screw MS 51957-41 (8-32 UNC-2A) with lock washer MS 35338-137 tightening torque max. 1.7 Nm current rating mounting holes in A ø3.2+0.15 .126+.006 Mounting instructions The devices must not be aligned in tightened state! There is a risk of permanent damage at the circuit mechanics and the housing may break!...

High Performance Thermal Circuit Breaker 483-... Other main terminal and threadneck designs Typical time/current characteristics Trip time in seconds Accessories Splash cover/hex nut assembly with O ring (IP66 and IP67) (approved to VG 95345, T23) X 200 801 08 nickel plated nut, transparent cover X 200 801 03 matt black finish nut, black cover X 200 801 09 matt black finish nut 7/16-32, black cover X 200 801 12 with blackened nut and transparent cover Accessories Identification collar to be snapped on the push button Y 307 004 01 black Y 307 004 02 white Y 307 004 03 red ø14 Y 307 004 04 green...