MODEL 3335C
2Pages

wTTa PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF DYTRAN INSTRUMENTS INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF DYTRAN INSTRUMENTS INC IS PROHIBITED SILVER WINDOW- MOUNTING SCREW, MODEL 6971, SHCS, 10-32 X .75 L.SUPPLIED- LOCKWIRE HOLE SCHEMATIC DIAGRAM /7\ US PATENT NUMBER US 8,375,793 B2 /13 DO NOT BEND CABLE WITHIN INDICATED SECTION ON BOTH ENDS OF CABLE DO NOT BEND CABLE WHILE SENSOR IS INSTALLED. HARDLINE CABLE: - JACKET: STAINLESS STEEL - INSULATION: SILICONE DIOXIDE - CONDUCTOR: STAINLESS STEEL - MININUM BEND RADIUS: 1.5 IN ARROW INDICATES DIRECTION OF ACCELERATION FOR NEGATIVE CHARGE OUTPUT HOUSING MATERIAL: ALLOY 600 2. WEIGHT, LESS CABLE: 35 GRAMS, MAX. 1. CHARGE SENSITIVITY: 1 - 2 pC/g NOTES: UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED: INTERPRET DIM & TOL PER ASME Y14-5M- 1994. REMOVE BURRS. COUNTERSINK INTERNAL THDS 90’ TO MAJOR DIA. CHAM EXT THDS 45° TO MINOR DIA. THD LENGTHS AND DEPTHS ARE FOR MIN FULL THDS. DIMENSIONS APPLY AFTER FINISHING. 63/ ALL MACHINED SURFACES. V TOTAL RUNOUT WITHIN .005. BREAK SHARP EDGES .005 TO .010. MACHINED FILLET RADII .005 TO -015. WELDING SYMBOLS PER AWS A2.4 ABBREVIATIONS PER MIL-STD-12. UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS TOLERANCES ARE: DECIMALS METRIC

SINGLE AXIS, CHARGE MODE ACCELEROMETER REV B, ECN 13555, 07/10/17 HERMETICALLY SEALED HIGH TEMPERATURE (1200°F [649°C]) OPERATION CASE GROUND ISOLATED TMsfam=y===== Notes: [1] Measured at 100Hz, 1 Grms per ISA RP 37.2 [2] Measured using zero-based straight line method, % of F.S. or any lesser range. [3] Low frequency response and phase response is function of charge amplifier. See graph below for example. [4] In the interest of constant product improvement, we reserve the right to change specifications without notice. [5] U.S. Patent number US 8,375,793 B2 applies to this unit....