7705A1 DUAL ELEMENT ACCELEROMETER
2Pages

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF DYTRAN INSTRUMENTS INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF DYTRAN INSTRUMENTS INC. IS PROHIBITED RECOMMENDED MOUNTING PREPARATION: PREPARE FLAT MOUNTING SURFACE, 0.65 [16.5] MIN, FLAT TO .001 TIR. TAP 10-32 UNF-2B ^.200 [5.1] MIN. TORQUE TO 10-12 Lb-in. UNLESS OTHERWISE SPECIFIED: INTERPRET DIM & TOL PER AS ME Y14.5M - 1994. REMOVE BURRS. COUNTERSINK INTERNAL THDS 90° TO MAJOR DIA. CHAM EXT THDS 45° TO MINOR DIA. THD LENGTHS AND DEPTHS ARE FOR MIN FULL THDS. DIMENSIONS APPLY AFTER FINISHING. 63/ ALL MACHINED SURFACES. V TOTAL RUNOUT WITHIN .005. BREAK SHARP EDGES .005 TO .010. MACHINED FILLET RADII .005 TO .015. WELDING SYMBOLS PER AWS A2.4. ABBREVIATIONS PER MIL-STD-12. UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS TOLERANCES ARE: DECIMALS METRIC OUTLINE/INSTALLATION DRAWING, 7705A SERIES CAGE CODE

PERFORMANCE SPECIFICATIONS DUAL ELEMENT ACCELEROMETER This family also includes: • DUAL ELEMENT TECHNOLOGY • EXTENDED LOW FREQUENCY RESPONSE (0 Hz to 10kHz) • HERMETICALLY SEALED New type of accelerometer from Dytran Instruments Inc. combines the DC output of variable capacitance element with excellent high frequency response of piezoelectric sensor. Both outputs are electrically summed up and seamlessly superimposed on each other to provide the broadest frequency response from a single output pin. | ENGLISH | | SI Maximum Shock (Gpeak) 5,000 5,000 Refer to the performance...