RECOMMENDED MOUNTING PREPARATION: PREPARE FLAT MOUNTING SURFACE, 01.50 [038.1] MIN, FLAT TO .001 TIR. TAP 2X 8-32 UNC-2B ^ .45 [11.4] MIN. (OR 2X M4x0.7 ^7.45 [11.4] MIN.) TORQUE TO 10-12 Lb-in. [1.12-1.35 N-m ] MATES WITH DYTRAN CABLES: - 6964AXX (9-PIN TO FLYING LEADS) - 6445AXX (9-PIN TO 7 BNC PLUGS ) (XX DENOTES LENGTH IN FEET) 4\ MARKING DENOTES LOCATION OF SENSING ELEMENT'S CENTER OF MASS ARROWS INDICATE GYROSCOPIC & ACCELERATION DIRECTIONS FOR POSITIVE OUTPUT 2. MATERIAL: TITANIUM ALLOY 1. WEIGHT: 25 GRAMS, MAX. NOTES: UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED: INTERPRET DIM & TOL PER ASMEY14 5M-1994 REMOVE BURRS COUNTERSINK INTERNAL THDS 90° TO MAJOR DIA CHAM EXT THDS 45° TO MINOR DIA THD LENGTHS AND DEPTHS ARE FOR MIN FULL THDS DIMENSIONS APPLY AFTER FINISHING ALL MACHINED SURFACES. TOTAL RUNOUT WITHIN 005 BREAK SHARP EDGES 005 TO 010 MACHINED FILLET RADII 005 TO .015. WELDING SYMBOLS PER AWS A2 4 ABBREVIATIONS PER MIL-STD-12. UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES DIMENSIONS IN BRACKETS [ 1 ARE IN MILLIMETERS TOLERANCES ARE: DECIMALS METRIC pSiArbd IINSTRUMEN

Model Number PERFORMANCE SPECIFICATION 6DOF VIBRATION SENSOR • VARIABLE CAPACITANCE TECHNOLOGY • 6 DEGREES OF FREEDOM MEASUREMENTS • HERMETICALLY SEALED • DC RESPONSE • INTERNATIONAL TRAFFIC IN ARMS REGULATION (ITAR) FREE Refer to the performance specifications of the products in this family for detailed description. PHYSICAL Weight, Max Connector Ty pe Material ACCELEROMETER PERFORMANCE Input Range Frequency Response (±5%) Frequency Response (±3dB) Scale Factor, Nom. [1] Output Noise,Typ Non-Linearity, Typ. [2] Temperature Range Scale Factor Temperature Coefficient [3] Axis misalignment,...