3053B TRIAXIAL ACCELEROMETER, IEPE

Product catalog summary

Overview: This document provides technical specifications and performance details for the Model 3053B triaxial accelerometer, manufactured by Dytran Instruments, Inc. It includes information on physical characteristics, performance metrics, environmental capabilities, and electrical requirements.

Specifications:

Weight: 6.2 grams (0.22 oz)
Material: Titanium Alloy
Mounting: Adhesive mount
Connector: 4-Pin, mates with Dytran cable 6430AXX

Performance:

Sensitivity: 10 mV/g (1.02 mV/m/s²)
Range: ± 500 g (± 4900 m/s²) per axis
Frequency Response: 2 to 5000 Hz
Resonant Frequency: >30 kHz
Electrical Noise Floor: <0.007 g rms (<0.07 m/s² rms)
Linearity: ± 1% F.S.
Transverse Sensitivity: Max. 5%

Environmental:

Maximum Vibration: ± 600 g (± 5880 m/s² pk)
Maximum Shock: ±5000 g pk (±49000 m/s² pk)
Temperature Range: -60 to +250 °F (-51 to 121 °C)
Seal: Hermetic
Thermal Sensitivity Coefficient: 0.03 %/°F (0.054 %/°C)

Electrical:

Supply Current: 2 to 20 mA
Compliance Voltage Range: +18 to +30 V
Output Impedance: Typ. 100 Ω
Bias Voltage: 9 to 11 VDC
Discharge Time Constant: 0.3 to 1.0 sec
Ground Isolation: >10 MΩ

Additional Information: The document includes typical low frequency and phase response graphs, and notes on the importance of current limiting to prevent damage to the integral IC amplifier. The accelerometer is internally case ground isolated and comes with an accredited calibration certificate (ISO 17025).

Catalog excerpts

Js A-«-, A ** 1 VIEW fir A LOOKING INTO CONNECTOR PINOUT PIN #1 SIG/PWR AXIS 1 (X) PIN #2 SIG/PWR AXIS 2 (Y) PIN #3 SIG/PWR AXIS 3 (Z) PIN #4 GND RETURN, COMMON 4 WEIGHT: 6.2 GRAMS. 3 XX=LENGTH IN FEET. 2. + SIGNS INDICATE SENSE AND DIRECTION OF INPUT ACCELERATION FOR POSITIVE GOING OUTPUT SIGNAL. 1. HOUSING MATERIAL: TITANIUM ALLOY SURFACE FINISH EXCEPT AS NOTED <r BREAK EDGES TO DEBURR RADIUS OR CHAMFER EXCEPT AS OTHERWISE NOTED ALL DIMENSIONS IN INCHES TOLERANCE: XXX = ± .005 xx=± .01 /\ THESE DIAS (°) TO T.I.R.

Open the catalog to page 1

PS3053B TRIAXIAL ACCELEROMETER, IEPE This family also includes: ADHESIVE MOUNT HERMETICALLY SEALED INTERNALLY CASE GROUND ISOLATED Model Refer to the performance specifications of the products in this family for detailed description. Supplied Accessories PHYSICAL Weight Mounting Provision [1] Connector [2] Material ENGLISH | | SI 1)Accredited calibration certificate (ISO 17025) Notes: [1] Case ground isolation is achieved by internal means. [2] Connector mates with Dytran cable assy. Model 6430AXX. (XX = length in feet) [3] Reference sensitivity measured at 100 Hz, 1 G RMS per ISA RP...

Open the catalog to page 2

3053B TRIAXIAL ACCELEROMETER, IEPE

3053B TRIAXIAL ACCELEROMETER, IEPE

Catalog excerpts

All Dytran Instruments, Inc. catalogs and technical brochures