Catalogs >
Druck >
Druck PDCR 300 For harsh test applications

Druck PDCR 300 For harsh test applications
1 / 3Pages

Catalog excerpts

Druck PDCR 300 For harsh test applications - 1

PDCR 300For harsh test applications This product has been specifically designed and tested to meet the harsh requirements found within many Aerospace applications, whilst also satisfying many industrial requirements. The product is founded on the highly reliable silicon chip produced within Druck's own 21st Century clean room. The Piezoresistive technology has been developed and enhanced for more than 45 years, which is widely used within the Aerospace/Industrial and Oil & Gas markets. This compact analogue sensor provides unrivalled performance across a wide Pressure and Temperature range, which lends itself very well for a variety of uses across high pressure requirements within hydraulic systems to low pressure, barometric measurement. No micro-processors are adopted within this product, which enables reliability at high temperatures to be achieved. The conditioned millivolt output is distributed through a 4-wire configuration. Construction • All Stainless Steel 316L, 17/4PH & INC 625 • 24 AWG PTFE Insulated cable Performance • NLH&R1 (see table 1) • Total Accuracy2 ± 3% Full Scale (across wide temp. range -55°C to +150°C) Target applications Aerospace Test and General Industrial Pressure ranges Zero based ranges: • Lowest Full Scale Range 110 kPa (1.1 bar) • Highest Full Scale Range 35 MPa (350 bar) See table 1 for complete offering. Mechanical properties • Pressure connection M5x0.8-6g • Proof Pressure 1.5 x Full Scale • Containment Pressure 2.0 x Full Scale • Media compatibility: - Ranges <=2MPa or =7MPa: Fluid compatible with SS17-4PH and SS316L - Ranges >2MPa to <7MPa: Fluid compatible with SS17-4PH, SS316L and Inconel 625 • Mounting Torque: 4 Nm maximum Electrical properties • Power Supply: 2.5 to 15 Vdc (output ratiometric to supply) • Input impedance: >2000 Ohms • Output Impedance: 5000 Ohms (nominal) • Insulation resistance >100 MOhms @ 500 Vdc 0 Druck a Baker Hughes business 1 The effects of Non-linearity, Hysteresis and Repeatability. 2 Accuracy includes the combined effects of Non-Linearity, Hysteresis, Repeatability (NLH&R) and zero & span over the calibrated

Open the catalog to page 1

Druck PDCR 300 For harsh test applications - 2

Table 1. Pressure ranges Physical properties Wiring details Laser marking details (example) Electrical connections PRESSURE RANGE FIGURE AND UNITS DATE OF MANUFACTURE PCDR300 P/N 300*111M0033-1 (Table 1) ◄--DRUCK PART NUMBER DRUCK Ltd s/n ******** ◄--SERIAL NUMBER ►*** * Pa a SUPPLY: 2.5 TO 15 Vdc -MMYYYY MADE IN CHINA

Open the catalog to page 2

Druck PDCR 300 For harsh test applications - 3

Notes: • For supply of this product outside of China, the TRS requirements will need to be considered on a case by case basis. • Standard Lead-time is 8 weeks from order for popular ranges. • Minimum Order Quantities any type (defined by pressure range) is 2 pieces. • Other ranges may be available upon request - subject to review and approval. Copyright 2021 Baker Hughes Company. All rights reserved. BHCS39123 (09/2021)

Open the catalog to page 3

Druck PDCR 300 For harsh test applications 1 / 3Pages

Catalog excerpts

All Druck catalogs and technical brochures

Druck PDCR 300 For harsh test applications
1 / 3Pages