ADTS 405 Mkll upgrade Druck air data test system A cost-effective upgrade solution for your ADTS 405 MkI Military authorities throughout the world have adopted the ADTS 405F variant as standard equipment over a number of years. The MkI version is obsolete and due to parts availability is no longer supported. The ADTS 405 MkII upgrade kit provides a cost-effective solution to remove the obsolescence, improve the specification and provide an extension to the operational life of MkI units. ADTS 405F - Transportable flight line unit This is a self contained portable unit with integral pressure/ vacuum supplies, housed in a single military standard enclosure. It is ideal for calibration and simulation on the flightline. A kit is available to upgrade the flightline unit which includes the following: • New front panel assembly including, manifold, valves, control sensors, TERPS main transducers, updated LDK and display, power switch, hand terminal connector and Mimic panel • New controller cards, motherboard and communication card • New pump motor assembly • New hand terminal • New power supplies ADTS 405 - Rack mounted unit (RS) This is a compact, 50 cm (19 in) rack mounting unit for laboratory or workshop use. It is ideal for integration with ATE systems, or simply for use as a convenient bench top tool. Pneumatic connections are available via either the front or rear panel to suit specific applications. An optional matched pressure/vacuum supply unit (PV103R) is available as a separate rack module. A kit is available to upgrade the rack mounted unit which includes the same as the flightline unit but the hand-terminal is op

ADTS 405 Mkll upgrade I DRUCK Features and benefits of upgrading Mkl to Mk II • Improved specification - upgraded units will match the specification of MkII flightline for EMC, shock, vibration, corrosion and expanded temperature range • Improved accuracy compared to the MkI version • Extended operational lifetime of existing assets • Cost-effective solution to purchasing a new unit • Provides a direct 'fit, form and function' replacement • Same look and feel as MkI unit so no additional cost of re-writing operations manuals or re-training personnel to operate • Fully compatible with existing...

ADTS 405 Mkll upgrade I DRUCK Rack mounted ADTS 405 The ADTS 405RS is a 50 cm (19 in) rack mounting module housing the main control system with local front panel display and keypad. The remote hand terminal is optional for this model and a matched separate pressure/vacuum supply unit is available - please refer to PV 103R Datasheet. • Airspeed: knots, km/hr, mph • Pressure: mbar, inHg, inH20 (4°C, 20°C, 60°F), mm Hg, kPa, hPa, psi • Airspeed: CAS (calibrated) : TAS (true - ability to enter temperature) • Rt CAS: Rate of calibrated airspeed • Rt EPR: Rate of engine pressure ratio Negligible calibration...

ADTS 405 Mkll upgrade I DRUCK Front panel mounted fittings with blanking caps • Static: AN-6 37° flare • Pitot: AN-4 37° flare Fitted with replaceable filter • Vacuum (AN6) and pressure (AN4) supply fittings on rear panel • Rear mounted Static AN-6 and Pitot AN-4 (Option) Pneumatic supplies For normal use with source pressure at 25% above specified pressure range. Compatibility with other dry, non-corrosive gases can be provided. Please refer to Druck. Non-condensing dry gases compatible with 316L Stainless Steel, Silicon, Silicon dioxide, Fluorosilicon RV adhesive and glass. Transportable military...

ADTS 405 MkII upgrade specifications Supporting services Druck provides services to enhance, support and complement the Aviation GSE range. Our highly trained staff can support you, no matter where you are in the world. Further details can be found in www.bakerhughesds. com/ druck/air-data-test-sets Training available on request. Nationally accredited calibration certificates New product is supplied with factory calibration certificates with measurements traceable back to international standards. For applications where initial nationally accredited calibration certificates are required or periodic...