7220
7220
- Feed per Tooth (fz): Various ranges are provided depending on the diameter (D1) and length (L1) of the tool. The feed per tooth is specified in millimeters (mm) and varies according to the material being machined.
- Cutting Speed (Vc): Expressed in meters per minute (m/min), the cutting speed is crucial for determining the efficiency and quality of the machining process.
- Tool Diameter (D1): The document specifies different diameter ranges (4-16 mm) for various materials and operations.
- Routing: The document outlines the conditions for routing operations, including the feed per tooth and cutting speed for different materials such as unalloyed steel, stainless steel, and special alloys.
- Slotting: Similar to routing, slotting conditions are provided with specific parameters for different materials, emphasizing the importance of tool diameter and cutting speed.
- The document categorizes materials into several types, including unalloyed steel, high alloyed steel, stainless steel, cast iron, Inconel, and various alloys.
- Each material type has specific cutting conditions to optimize machining performance.
- Adhere to the specified feed per tooth and cutting speed to ensure optimal tool performance and longevity.
- Consider the material properties and tool diameter when setting up machining operations.
Catalog excerpts
CUTTING CONDITIONS - ROUTING ap Feed per tooth Materials to be machined Unalloyed steel / Low alloyed steel Unalloyed steel / Low alloyed steel Lead alloyed cutting steel High alloyed steel Stainless steel DUPLEX stainless steel Grey cast iron / Nodular pearlitic iron Alloyed cast iron / Nodular pearlitic iron Nodular ferritic cast iron / Malleable cast iron Special alloys / Heat resistant stainless steel Titanium, titanium alloys Copper alloys - easy to machine Copper alloys - difficult to machine Gold, silver
Open the catalog to page 1
CUTTING CONDITIONS - SLOTTING ap ae Feed per tooth Materials to be machined Unalloyed steel / Low alloyed steel Unalloyed steel / Low alloyed steel Lead alloyed cutting steel High alloyed steel Stainless steel DUPLEX stainless steel Grey cast iron / Nodular pearlitic iron Alloyed cast iron / Nodular pearlitic iron Nodular ferritic cast iron / Malleable cast iron Special alloys / Heat resistant stainless steel Titanium, titanium alloys Copper alloys - easy to machine Copper alloys - difficult to machine Gold, silver
Open the catalog to page 2All DIXI POLYTOOL catalogs and technical brochures
70272 Pages
17372 Pages
11392 Pages
Cutting conditions1 Page