XVID3V2
16Pages

To work from 15-40Km Range max. lOOKm Visualize instrumental F16 Exlusive XLRS instruments Interprets Mavlink data Configurable Pages Frequencies 1.2Ghz, 2.4Ghz or 5.8Ghz Single or Dual Band RF Power up to 1W 8 Video Channels Video Transmitter 1.2Ghz, 2.4Ghz or S.SGhz Vehicles DRONES; UAVf MULTIROTORS, RPAS, VANTr UAV, AIRCRAFT, HELICOPTERS, UUV, UGV, ROV, USV, ASV, CARS, BOATS, ROBOTS... #% EXTENDED www.xlrs.eu Manufactured by DMD. Digital Micro Devices. ©2021

Professional analog video system prepared for all types of FPV applications with lOOOmW RF Power in 1.2Ghz, 2.4Ghz or 5.8Ghz to work between 15-40Km (LOS) and with a maximum range of 100km or more depending configuration and antennas. As a novelty in the RXVID3 V2 video receiver, now the video receiver modules for diversity mode can work individually, which means that a single frequency can be used in the two RX modules or each module in a different frequency to have a redundant system and working in diversity mode, with which the system will automatically select the RX with the highest...

Protective Transport Suitcase The video receiver and antennas come with a robust suicase to transport the entire video system safely and easily. As the RXVID3V2 is integrated in the directional antenna, it is ready to use and if you use the TRI270 tripod, the installations is very simple you will not need adaptations, just install the antenna with knobs, connect the antennas and turn on the RXVID3V2. - IP67 certificate, waterproof and strong made ofABS, it offers high resistance and durability against shocks and impacts to transported devices. Thanks to the adaptable foam of ERR, that is a...

VID FPV Analog Video System Optionally you can purchase TRI270 tripod with The complete installation can take about 2-4 minutes. You don't need to see the assembly manual, the installation of the tripod and antennas is very intuitive. It is mechanically prepared and with accessories to install antennas as: BQ89, MX433, ANTPLA24G17DB or similar, it can support up to 25Kg of load, it is extensible up to 2.70m, it folds easily and has a transport bag with internal padding to protect against bumps in daily work. T-Bar which is specifically adapted to place several types of RC and Video antennas...

VD FPV Analog Video System Analog video receiver with two internal individual video receiver modules that work in diversity mode at different frequencies 1.2Ghz, 2,4Ghz or5.8Ghz with 8 video channels and batery with autonomy of 8-10h. Depending on the XVID3V2 video system you have selected you can have the two receiver modules working on the same frequency or each receiver module on a different frequency, in this way you can have the RXVID3V2 receiver working on two different frequencies to obtain a redundant system. Also has a 5.8Ghz short range video transmitter to view the video in...

OSD with analog video transmitter 1.2Ghz, 2.4Ghz or S.8Ghz / 1W Video transmitter with 1W(+ 30dBm) of RF power and depending on the device it can work in 1.2Ghz, 2.4Ghz or 5,8Ghz with 8 video channels, can be powered from 8-18V, inputs for 2 video cameras with PAL format, 4 auxiliary RC channels (Control only from XLRS transmitters), 1 input Mavlink for to connect the telemetry of the autopilot and a Female-SMA connector to connect an extender together with the omnidirectional antenna, Weight: 72g, Dimensions: 82 x 37 x 39mm approx. Box: Plastic and fiber base 2mm. OSD presents graphics,...

XOSD Analog Video TransmitterOn Screen Display + Video Transmitter 1,2Ghz/lOOOmW/4Ch RC /1 Port MA VLINK Telemetry/2INP Camera Format & Resolution: Frequency: Potency: Analog video (PAL). 625-Lines (576i). 25 Frames per second. 50 Fields per second. 1.2Ghz. lOOOmW (+30dB). Potency (Opt.): lOOmW ( + 20dB with att. lOdB). Channels: 8. 5V. Min 4.5V. Max 6Vcc (To feed the RC channels) Consumption: Standby 50mA. Max. 750mA. Working Temperature: 10°C ~ +85°C (CPU). Ambient Temperature: Connectivity: Upgradable & Configurable: DMDStudio Soft. To configure, you need an RX XLRS or use a TTL 3.3V to...

Receiver Video Diversity Receiver + Video Transmitter RX 1.2Ghz/TX 5,8Ghz lOmVI SPECIFICATIONS VIDEO RECEIVER: Video Receivers: 2, Diversity. SPECIFICATIONS VIDEO TRANSMITTER: Frequency: 5.8Ghz. Chi: 5733Mhz | Ch2: 5752Mhz | Ch3: 5771Mhz Ch4: 5790Mhz | Ch5: 5809Mhz | Ch6: 5828Mhz Ch7: 5847Mhz | Ch8: 5866Mhz Voltage: 3.7V. 4.2V Full load. Capacity: 5000mAh. Cells: 1 cell 3.7V/5Ah. Type: Lithium polymer. Duration: 8-10h. Battery Charge: 1A, USB (Micro-B). Protected against over current. Protected against excess load. Automatic disconnection. Protected against excessive discharge. Automatic...

1- XOSD3B-1G2. OSD + Video Transmitter 1.2Ghz lOOOmW. 1- RXVID3V2-1G2. Video Diversity Receiver 1.2Ghz + Video Transmitter 5.8Ghz lOmW. 1- LAT05M_SMAH/SMAM. Cable SMA-Female to SMA-Male, 500mm 1- LAT20MSMAFNM. Cable SMA-Male to Connector N-Male, 200mm 1- CABLE_PX4_XOSD. Cable Pixhawk for XOSD 1- CABLE_SERVO_HH. Cable Servo RC Female to Female. 1- CABLE_USB/MICROUSB. Cable USB-A Male to Micro USB-B Male, 2m. 1- CABLE_JRCA. Cable Audio Stereo Minijack 3.5M to RCA Male. 1- Clamp U-Bolt piece. #%gXtgndgd www.xlrs.eu Manufactured by DMD. Digital Micro Devices. ©2021

XOSDflHf Analog Video TransmitterOn Screen Display + Video Transmitter 2.4Chz lOOOmW/4Ch RC/1 Port MAVLINK Telemetry/2INP Camera Format & Resolution: Analog video (PAL). 625-Lines (576i). 25 Frames per second. 50 Fields per second. Frequency: 2.4Ghz. Potency (Opt.): lOOmW ( + 20dB with att. lOdB). Upgradable & Configurable: DMDStudio Soft. To configure, you need an RX XLRS or use a TTL 3.3V to USB converter. Box: Plastic and fiber base 2mm. RC Channels: 4 (Only work with RX XLRS). RCBUS: 2 (To RX XLRS or 2nd XOSD). Input Cameras: 2 (Format: PAL) (Use same power as the XOSD, it can be...

Video Diversity Receiver + Video Transmitter RX 2,4Ghz TX 5.8Ghz WmWSPECIFICATIONS VIDEO RECEIVER: Video Receivers: Frequency: Sensitivity: Channels: Chi:2414Mhz | Ch4:2468Mhz | Ch7:2390Mhz | SPECIFICATIONS VIDEO TRANSMITTER: Frequency: 5.8Ghz. Potency: lOmW (+10dB). Video Receivers (2.4Ghz): 2. Video Transmitter (5.8Ghz): 1. Display Color: 1. Encoder with push button (Control menu). RCBUS: Serial Comunication. Output Audio /Video: 1 (Minijack 3.5mm). Voltage: 3.7V. 4.2V Full load. Capacity: 5000mAh. Cells: 1 cell 3.7V/5Ah. Type: Lithium polymer. Duration: 8-10h. Battery Charge: 1A, USB...