XVHD-SAT
7Pages

Ground Module for SATPRO XV Professional Video Receiver Full H D HI Interface: HDMI, Ethernet D~ Frequency: 2.4Ghz ■ Hopping / Fixed Frequency B Codec H.265/H.264 m Bit rate 500kbps ~ 5Mbps -j Radio Control & Mavlink Telemetry Professional RC Receiverand 2.4Ghz Video Transmitter Full HD T 2.4Ghz Video Boosterfor XVTR up to 8W Full HD Video System | Range Max. Up to 150Km Radio Control & Telemetry | Range Max. Up to 250Km \ lrs EXTENDED www.xlrs.eu Manufactured by DMD. Digital Micro Devices. ©2023

XVT Professional Receiver and Video Transmitter Line-Of-Sight Range Max.: 150Km. Depending on antepfTas; RF Power and XBOOST24G video booster module. ^ Band width: 3Mhz | 5Mhz | lOMhz | 20Mhz Video Delay: Below 250ms UART Port: 115200b (default) Interfaces: HDMI, Ethernet Antennas Connection: MMCX-Female Compliance Standards: CE, FCC (Without Booster module) www.xlrs.eu Manufactured by DMD. Digital Micro Devices. ©2023

RF RADIO RC MODULE (XVTR) TECHNICAL SPECIFICATIONS Receiver: Optional, External (RXLRS) or internal (XVTR) Line-Of-Sight Range: 250Km. Depending on antennas Range RC & Telemetry: CE lOOKm, FCC 250Km RF Channels: Max.255 for band (Depend on final configuration) Separation Channels: 25, 50, 100 or 150Khz according RF band Modulation: 2- GFSK. 50 or 100Kb. FHSS (Frequency Hopping Spread Spectrum) or fixed channel. Stability: TXCO +-lppm RSSI: Digital. Calibrated +-ldBm RC Packages: 40 per second RC and Telemetry (25msec latency) Data Rate (TELEM Port): 38400, 57600, 115200 bauds IP Address (RF...

GENERAL TECHNICAL SPECIFICATIONS General Leds: 1 Green Led: Power Indicator. RF RC module Leds: 1 Red Led: TX RF or Transmit RC packets. 1 Blue Led: Link RF or Received RC packets. TX Video Leds: 1 Greend Led: Link is established. 1 Greend Led: Status Indicator. Voltage: 9-28V. (Battery 3S - 6S). Power Connector: XT30 Male. Consumption: 7.5 - 19W (According to options). Work Temperature: -20°C to +60°C. Size: 111 x 72 x 34mm. Weight: 165g. Box: Plastic and aluminum. YLRS #\ gXtgndgd www.xlrs.eu Manufactured by DMD. Digital Micro Devices. ©2023

Professional Receiver CE 869Mhz lOOKm FCC 902Mhz 200km Custom up to 250Km Professional Receiver Ultra Long Range RC & Telemetry Radio Control & Telemetry Powerful and Safe with control Configuration of the mixes, button activation and assignment of encoders are performed in the RX and not in the TX XLRS as is usual in amateur RC systems. Control max up to 16 CH RC. Using the 7CH physical and the autopilot CH through SPPM in CH7. 8 Multifunction outputs for RC servos. 1 SPPM / CPPM: 12 RC channels in CH7. 1 Micro USB: Update and configuration. 1 i2C: To connect future devices, Oled display,...

VIDEO RECEIVER TECHNICAL SPECIFICATIONS Line-Of-Sight Range Max.: 150Km. Depending on antennas, RF Power and XBOOST24G video booster module. Video Ranges: 17Km, 30Km, 50Km, lOOKm, 150km. Frequency: 2.4Ghz: 2408Mhz - 2480Mhz. Band width: 3Mhz | 5Mhz | lOMhz | 20Mhz. Max. RF power: 2W(33dBm) | 4W(36dBm) | 8W(39dBm). Sensitivity max. with LNA: -92dBm | -96dBm. Video Bit Rate: 500k-5Mbps. Resolution: 1080p, 60fps. Modulation Mode: OFDM. CODEC: H.265/H.264. Video Delay: Below 250ms. UART Port: 115200b (default). Interfaces: HDMI, Ethernet. Main Antenna Connection: SMA-Female. Compliance...

1 Red Led: ON / OFF Indicator. RCBUS: Communications with SATPRO. C0M5: Communications with SATPRO. USB: Connect to USB disk for video recording. Modes to activate/deactivate Booster: - Manual. It is activated manually by command from DMDStudio. - RSSI. It is activated automatically when it has a low RSSI signal. - Distance. It is activated automatically from 200 meters. - By default. It is configured with RSSI + Distance, if RSSI will not work then it is automatically activated by distance. RX & Booster, Voltage: 9-28V. (Battery 4S, SATPRO). RX Power Connector: JST GH-7. Booster Power...