HSI-LV (multi-pin types)

Product catalog summary

Isolated Low Voltage Module Overview
This document provides detailed specifications for an isolated low voltage module used in various measurement applications. The module supports multiple voltage and current input ranges, with a bandwidth of 2 MHz. It includes additional signal input capabilities for IEPE® constant current powered sensors and RTD resistance temperature detectors.

Specifications

Voltage Input Ranges: 12 ranges from 10 mV to 50 V.
Current Input: ±20 mA using SE-CUR-SHUNT-1, ±5 A using SE-CUR-SHUNT-4 or -SHUNT-5.
Bandwidth: 2 MHz.
Input Coupling: DC or AC, software selectable.
Gain Linearity: Typically 0.01%, max 0.04% of full scale.
Input Resistance: 1 MOhm.
Isolation Voltage: 1 kVRMS.

Accuracy and Stability

1 Year Accuracy: Varies by range and frequency, with specific percentages of reading and range detailed.
Gain Drift Range: Typically 10 ppm/°C, max 30 ppm/°C.
Offset Drift: Varies by range, typically 3 µV/°C for 10 mV to 200 mV.
Long Term Stability: 100 ppm/sqrt (1000 hrs).

Filter and Signal Characteristics

Filter Selection: Push button or software, with options from 100 Hz to 2 MHz.
Filter Type: Bessel or Butterworth, with specific characteristics for each.
Typical SFDR and SNR: Detailed for various bandwidths and input ranges.
Typical CMRR: Varies by frequency and input range.

Protection and Power

Input Overvoltage Protection: 350 VDC.
Output Protection: Short to ground for 10 seconds.
Power Supply: ±9 VDC ±1%.
Power Consumption: 1.1 W without sensor supply.

Additional Features

Integrated Temperature Sensor: Yes.
RS-485 Interface: Yes.
TEDS Support: Hardware support for TEDS with specific chips supported.

Catalog excerpts

HSI-LV Isolated low voltage module ■ Voltage input: 12 ranges (10 mV to 50 V) j Current input: ±20 mA using SE-CUR-SHUNT-1 Additional signal input using MSI ■ IEPE® Constant current powered sensors (accelerometers,microphones); 12 ranges (10 mV to 5 V); requires MSI-V-ACC ■ RTD Resistance Temperature Detector (Pt100 to Pt2000) 9 resistance ranges (8 to 4000 Q); requires MSI-V-RTD continued on next page

Open the catalog to page 1