All-In-One DEWE-2600 ■ High performance portable all-in-one instrument j Flexible mixture of isolated and differential analog inputs ■ Function panels for digital I/O, counters, sensor supply ... ■ Up to 7 PCI slots for A/D and other cards (1394, ARINC, 1553.) ■ Fully battery powered (optional) Choose from three models Add your choice of signal conditioning, A/D board(s) and software to complete these systems Additional interfaces and sensors Measurements are not limited to just classic analog and digital signals. Please find further detailed information to expand your system in the chapter “Components”. Needed to complete the system DEWE-ORION “A/D Boards” offer simultaneous sampled analog inputs, synchronous digital I/Os, high-performance counters and high-speed CAN interfaces. DAQP- or MDAQ signal amplifiers and software are needed as well. Options to expand the system Add further “Interface Cards” like ARINC-429, 1553, PCM telemetry, FireWire and analog output or special “Sensors” like synchronized Video, industrial encoders (RIE-360) or GPS.

Configuration Guide DEWE-2600 Most flexible model, prepared for DAQP isolated analog input amplifier modules. DAQP conditioners offer highest bandwidth, great accuracy, different input ranges and integrated filters. Besides the single channel modularity – a module easily can be changed by the user at any time – the main advantage of these modules is the high galvanic isolation which ensures safe measurements, high quality results and make them almost indestructible. See chapter “Signal Conditioning” for details. Function panels Analog input - DAQ modules ±15 V power supply and digital status...

MDAQ panels Analog input - DAQ modules Counter input with digital input 0.5U-CLAMP-DC-POWER-8 0.5 U 2U ±15 V power supply and digital status lines for PNA-CLAMP-150-DC 0.5U-AMPFLEX-POWER-8 Dedicated Instruments This version combines slots for isolated DAQP modules and positions for differential MDAQ blocks. Thus it enables you configuring a cost optimized system that needs isolated inputs, e.g. high voltage signals, and a number of differential inputs, e.g. accelerometers. Analog input - MDAQ modules Analog output 16 isolated DAQP modules 4 MPAD modules (16 tc “T” and 16 tc “J” inputs) 8 counters...

System options and upgrades for DEWE-2600 series 2600-PS-BAT Optional battery power supply This option turns your DEWE-2600 into a fully battery powered instrument. The hot-swappable batteries guarantee continuous operation without an external power source. The instrument provides 3 slots for BAT-95WH batteries and can be operated for up to ~2 hours with 3 batteries installed. Since this time depends a lot on the system configuration the battery status is shown directly in the software. Also alarm conditions can be set and the battery parameters can be displayed as additional measurement channels....