- Catalogs
- DAVID CLARK COMPANY INC.
- Model H10-21 Aviation Headset
Model H10-21 Aviation Headset
Model H10-21 Aviation Headset
- 5-foot extended coil cord with dual plugs for connectivity.
- Certified Noise Reduction Rating of 24 dB, ensuring effective noise cancellation.
- Exceeds RTCA/DO-214 Standards, indicating high performance and reliability.
- Five-year warranty, providing long-term assurance.
- Manufactured in the USA, ensuring quality craftsmanship.
- FAA TSO Approved C57B, C58a, meeting aviation standards.
- NSN 5965-01-446-1479, indicating its standardized identification.
- Ear coupling: Around-the-ear design for comfort.
- Hardware: Made of durable steel.
- Earphone Plug: PJ-055 (.25” phone plug).
- Mic Plug: PJ-068 (.206” phone plug).
- Connection Cable: Approximately 5 ft. (1.5 m) straight cord.
- Weight without cable: Approximately 19 oz. (562 g).
- Dome type: ABS material for durability.
- Earphone Sensitivity: 90 dB SPL on flat plate coupler, re 1mW input @1KHz.
- Contact pressure: ~0.6 lb. (2.7 N).
- Total Harmonic Distortion (THD): Less than 1% at 110 dB SPL (300 - 3,000 Hz).
- Earphone Type: Dynamic with an impedance of 150Ω (300 each; wired in parallel).
- Ear Frequency Response: 200 – 5,500 Hz.
- Microphone Principle: M-7A Amplified Electret.
- Mic Impedance: 50Ω +/- 20%.
- Mic Sensitivity: 400mV+/-6dB into 150Ω load @ 1kHz for 114dB SPL input.
- Mic Frequency Response: 300Hz – 3.5KHz per RTCA DO 214.
- Mic DC Supply Voltage: 8-16V, not polarity sensitive.
- Source Resistance: 470Ω.
- Super-soft head pad for enhanced comfort.
- Larger, yet lighter, undercut Comfort Gel ear seals for better fit and comfort.
- Flex boom assembly for adjustable microphone placement.
- M-7A advanced noise-cancelling microphone for clear communication.
- Low-profile volume control knob with detent settings for easy adjustments.
Catalog excerpts
Model H10-21 Aviation Headset Headset-Mic, Over-The-Head Model H10-21 / 40074G-03 Data Sheet -► Model H10-21 Aviation Headset 0 Super-soft head pad 0 Larger, yet lighter, undercut Comfort Gel ear seals 0 Flex boom assembly can be adjusted for perfect microphone placement 0 M-7A, advanced noise-cancelling microphone 0 Low-profile volume control knob with detent settings 0 5-foot extended coil cord and dual plugs 0 Certified Noise Reduction Rating - 24 dB 0 Exceeds RTCA/DO-214 Standards 0 Five-year warranty 0 Made in USA 0 FAA TSO Approved C57B, C58a 0 NSN 5965-01-446-1479 360 Franklin Street, Box 15054, Worcester, MA 01615-0054 • Tel: 800-298-6235 • Fax: 508-753-5827 © 2016 David Clark Company Incorporated • Email: [email protected] • Web site: www.davidclark.com Technical data subject to change without prior notice. Current data available at www.davidclark.com
Open the catalog to page 1All DAVID CLARK COMPANY INC. catalogs and technical brochures
Model H10-13 S1 Page
H10-13 Y1 Page
H20-161 Page
H10-60 H1 Page
H10-561 Page
DC ONE-XH1 Page
H10-13N1 Page
H10-13HXP1 Page
H10-13HXL1 Page
H10-13H1 Page
DC PRO-XP1 Page
DC PRO-XA1 Page
DC ONE-XP1 Page
H10-001 Page
General Aviation Headset9 Pages
DC PRO-X Hybrid ENC Headset8 Pages
DC ONE-X1 Page
H10-301 Page
DC PRO-A1 Page
DC PRO1 Page
H10-13.41 Page
