- Catalogs
- DAVID CLARK COMPANY INC.
- Model H10-13 S
Model H10-13 S
Model H10-13 S
- Molded cord assembly designed for exceptional pull and flex standards.
- Certified Noise Reduction Rating of 23 dB.
- Stereo version with a 5-foot straight cord and dual plugs, featuring an inline Stereo/Mono switch.
- Exceeds RTCA/DO-214 Standards.
- Five-year warranty and made in the USA.
- FAA TSO Approved C-57b, C58a.
- Ear Coupling: Around-the-ear.
- Hardware: Steel.
- Connector Type: PJ-055 (.25” phone plug).
- Connection Cable: Approximately 5 ft. (1.5 m) straight cord.
- Weight without Cable: Approximately 16.5 oz. (488 g).
- Dome Type: ABS.
- Characteristic SPL: ~95 dB SPL (1 kHz, 1 mW) at maximum volume nominal.
- Contact Pressure: ~0.6 lb. (2.7 N).
- Total Harmonic Distortion (THD): Less than 1% at 110 dB SPL (300 - 3,000 Hz).
- Transducer Principle: High Fidelity Dynamic.
- Ear Impedance: 300Ω stereo / 150Ω mono.
- Ear Frequency Response: 10 – 20,000 Hz.
- Microphone Principle: M-7A Amplified Electret.
- Mic Impedance: 50Ω +/- 20%.
- Mic Sensitivity: 400mV +/- 6dB into 150Ω load at 1kHz for 114dB SPL input.
- Mic Frequency Response: 300Hz – 3.5KHz per RTCA DO 214.
- Mic DC Supply Voltage: 8-16V, not polarity sensitive.
- Source Resistance: 470Ω.
- Expanded, super-soft, double foam head pad for comfort.
- Larger, yet lighter, undercut Comfort Gel ear seals.
- Universal flex boom for optimal microphone placement.
- Exclusive M-7A, the most advanced noise-cancelling microphone available.
- Low-profile volume control knob with detent settings.
Catalog excerpts
Model H10-13 S Aviation Headset Headset-Mic, Over-The-Head, Stereo Model H10-13 S / 40422G-01 Data Sheet Ø Molded cord assembly made to exceptional pull and flex standards Ø Certified Noise Reduction Rating – 23 dB Ø The Stereo version of the H10-13.4 with a 5 foot straight cord and dual plugs. (Inline Stereo/Mono switch) Ø Exceeds RTCA/DO-214 Standards Ø Five-year warranty Ø Made in USA Ø FAA TSO Approved C-57b, C58a TECHNI CAL DATA Ear coupling Hardware Connector Type Connection Cable Weight w/o cable Dome type Characteristic SPL Model H10-13 S Aviation Headset FEATURES AND BENEFI TS Ø Expanded, super-soft, double foam head pad Ø Larger, yet lighter, undercut Comfort Gel ear seals Ø Universal flex boom for perfect microphone placement Ø Exclusive M-7A, the most advanced noisecancelling microphone available Contact pressure Total harmonic distortion (THD) Transducer principle Ear Impedance Ear Freq Response Microphone principle Mic Impedance Mic Sensitivity Mic Freq Response Mic DC Supply V. Source Resistance Around-the-ear Steel PJ-055 (.25” phone plug) ~ 5 ft. (1.5 m) straight cord ~ 16.5 oz. (488 g) ABS ~95 dB SPL (1 kHz, 1 mW) @ maximum volume nominal ~0.6 lb. (2.7 N) < 1% - 110 dB SPL (300 3,000 Hz) High Fidelity Dynamic 300Ω stereo / 150Ω mono 10 – 20,000 Hz M-7A Amplified Electret 50Ω +/- 20% 400mV+/-6dB into 150Ω load @ 1kHz for 114dB SPL input 300Hz – 3.5KHz per RTCA DO 214 8-16V, not polarity sensitive 470Ω Ø Low-profile volume control knob with detent settings 360 Franklin Street, Box 15054, Worcester, MA 01615-0054 Tel: 800-298-6235 Email: [email protected] Web site: www.davidclark.com c 2016 David Clark Company Incorporated Technical data subject to change without prior notice. Current data available at www.davidclark.com
Open the catalog to page 1All DAVID CLARK COMPANY INC. catalogs and technical brochures
H10-13 Y1 Page
H20-161 Page
H10-60 H1 Page
H10-561 Page
DC ONE-XH1 Page
H10-13N1 Page
H10-13HXP1 Page
H10-13HXL1 Page
H10-13H1 Page
DC PRO-XP1 Page
DC PRO-XA1 Page
DC ONE-XP1 Page
H10-001 Page
General Aviation Headset9 Pages
DC PRO-X Hybrid ENC Headset8 Pages
DC ONE-X1 Page
H10-301 Page
DC PRO-A1 Page
DC PRO1 Page
H10-13.41 Page
