video corpo

H10-30

H10-30

Product catalog summary
Features and Benefits
  • Molded cord assembly designed for exceptional pull and flex standards.
  • Certified Noise Reduction Rating of 24 dB.
  • Exceeds RTCA/DO-214 Standards.
  • Five-year warranty.
  • Made in the USA.
  • FAA TSO Approved C-139.
Technical Specifications
  • Ear Coupling: Around-the-ear.
  • Hardware: Steel.
  • Connector Type: PJ-055 (.25” phone plug).
  • Connection Cable: Approximately 5 ft. (1.5 m) straight cord.
  • Weight without Cable: Approximately 20 oz. (567 g).
  • Dome Type: ABS.
  • Characteristic SPL: ~95 dB SPL (1 kHz, 1 mW) at maximum volume nominal.
  • Contact Pressure: ~0.6 lb. (2.7 N).
  • Total Harmonic Distortion (THD): Less than 1% at 110 dB SPL (300 - 3,000 Hz).
  • Transducer Principle: Dynamic.
  • Ear Impedance: 150Ω (300 each; wired in parallel).
  • Ear Frequency Response: 200 – 5,500 Hz.
Microphone Specifications
  • Microphone Principle: M-1/DC Amplified Dynamic.
  • Mic Impedance: 150Ω +/- 20%.
  • Mic Sensitivity: 400mV+/-6dB into 150Ω load at 1kHz for 114dB SPL input.
  • Mic Frequency Response: 300Hz – 3.5KHz per RTCA DO 214.
  • Mic DC Supply Voltage: 8-16V, not polarity sensitive.
  • Source Resistance: 470Ω.
Additional Features
  • Super-soft head pad for comfort.
  • Larger, yet lighter, undercut Comfort Gel ear seals.
  • Wire boom for easy microphone placement.
  • Marketed as the "Best Value" Headset.
  • Equipped with the M-1/DC microphone, considered the best Amplified Dynamic microphone available.
See more

Catalog excerpts

H10-30-1

Model H10-30 Aviation Headset Headset-Mic, Over-The-Head Model H10-30 / 12508G-17 Data Sheet Ø Molded cord assembly made to exceptional pull and flex standards Ø Certified Noise Reduction Rating – 24 dB Ø Exceeds RTCA/DO-214 Standards Ø Five-year warranty Ø Made in USA Ø FAA TSO Approved C-139 TECHNI CAL DATA Ear coupling Hardware Connector Type Connection Cable Weight w/o cable Dome type Characteristic SPL Model H10-30 Aviation Headset FEATURES AND BENEFI TS Ø Super-soft head pad Ø Larger, yet lighter, undercut Comfort Gel ear seals Ø Wire boom for easy microphone placement Ø Our “Best Value” Headset Ø M-1/DC microphone, the best Amplified Dynamic microphone on the market Contact pressure Total harmonic distortion (THD) Transducer principle Ear Impedance Ear Freq Response Microphone principle Mic Impedance Mic Sensitivity Mic Freq Response Mic DC Supply V. Source Resistance Around-the-ear Steel PJ-055 (.25” phone plug) ~ 5 ft. (1.5 m) straight cord ~ 20 oz. (567 g) ABS ~95 dB SPL (1 kHz, 1 mW) @ maximum volume nominal ~0.6 lb. (2.7 N) < 1% - 110 dB SPL (300 3,000 Hz) Dynamic 150Ω (300 each; wired in parallel) 200 – 5,500 Hz M-1/DC Amplified Dynamic 150Ω +/- 20% 400mV+/-6dB into 150Ω load @ 1kHz for 114dB SPL input 300Hz – 3.5KHz per RTCA DO 214 8-16V, not polarity sensitive 470Ω 360 Franklin Street, Box 15054, Worcester, MA 01615-0054 Tel: 800-298-6235 Email: [email protected] Web site: www.davidclark.com c 2016 David Clark Company Incorporated Technical data subject to change without prior notice. Current data available at www.davidclark.com

 Open the catalog to page 1

All DAVID CLARK COMPANY INC. catalogs and technical brochures

  1. H10-13 Y

    1  Page

  2. H20-16

    1  Page

  3. H10-60 H

    1  Page

  4. H10-56

    1  Page

  5. DC ONE-XH

    1  Page

  6. H10-13N

    1  Page

  7. H10-13HXP

    1  Page

  8. H10-13HXL

    1  Page

  9. H10-13H

    1  Page

  10. DC PRO-XP

    1  Page

  11. DC PRO-XA

    1  Page

  12. DC ONE-XP

    1  Page

  13. H10-00

    1  Page

  14. DC ONE-X

    1  Page

  15. DC PRO-A

    1  Page

  16. DC PRO

    1  Page

  17. H10-13.4

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.