Model H10-13.4 Aviation Headset Headset-Mic, Over-The-Head Model H10-13.4 / 40411G-01 Data Sheet Ø Molded cord assembly made to exceptional pull and flex standards Ø Certified Noise Reduction Rating – 23 dB Ø Exceeds RTCA/DO-214 Standards Ø Five-year warranty Ø Made in USA Ø FAA TSO Approved C57B, C58a Ø NSN 5965-01-446-1530 TECHNI CAL DATA Ear coupling Hardware Earphone Plug Mic Plug Connection Cable Weight w/o cable Dome type Earphone Sensitivity Model H10-13.4 Aviation Headset FEATURES AND BENEFI TS Ø Expanded, super-soft, double foam head pad Ø Larger, yet lighter, undercut Comfort Gel ear seals Ø Universal flex boom for perfect microphone placement Earphone Type Ear Impedance Ear Freq Response Microphone Mic Impedance Mic Sensitivity Mic Frequency Response Mic DC Supply V. Source Resistance Around-the-ear Steel PJ-055 (.25” phone plug) PJ-068 (.206” phone plug) ~ 5 ft. (1.5 m) straight cord ~ 16.5 oz. (488 g) ABS 90 dB SPL on flat plate coupler, re 1mW input @ 1KHz Dynamic 150Ω (300 each; wired in parallel) 200 - 5,500 Hz M-7A Amplified Electret 50Ω +/- 20% 400mV+/-6dB into 150Ω load @ 1kHz for 114 dB SPL input 300Hz – 3.5KHz per RTCA DO 214 8-16V, not polarity sensitive 470Ω Ø Exclusive M-7A, the most advanced noisecancelling microphone available Ø Low-profile volume control knob with detent settings 360 Franklin Street, Box 15054, Worcester, MA 01615-0054 Tel: 800-298-6235 Email: [email protected] Web site: www.davidclark.com c 2016 David Clark Company Incorporated Technical data subject to change without prior notice. Current data available at www.davidclark.com