video corpo

H10-13 Y

H10-13 Y

Product catalog summary
Features and Benefits
  • Molded cord assembly designed for exceptional pull and flex standards.
  • Certified Noise Reduction Rating of 23 dB.
  • Smaller version of the H10-13.4, suitable for younger pilots and upgradeable to a full-sized version.
  • Exceeds RTCA/DO-214 Standards.
  • Five-year warranty and made in the USA.
  • FAA TSO Approved C-57b, C58a.
Technical Specifications
  • Ear Coupling: Around-the-ear
  • Hardware: Steel
  • Connector Type: PJ-055 (.25” phone plug)
  • Connection Cable: Approximately 5 ft. (1.5 m) straight cord
  • Weight without Cable: Approximately 16 oz. (473 g)
  • Dome Type: ABS
  • Characteristic SPL: ~95 dB SPL (1 kHz, 1 mW) at maximum volume nominal
  • Contact Pressure: ~0.6 lb. (2.7 N)
  • Total Harmonic Distortion (THD): Less than 1% at 110 dB SPL (300 - 3,000 Hz)
  • Transducer Principle: Dynamic
  • Ear Impedance: 150Ω (300 each; wired in parallel)
  • Ear Frequency Response: 200 – 5,500 Hz
  • Microphone Principle: M-7A Amplified Electret
  • Mic Impedance: 50Ω +/- 20%
  • Mic Sensitivity: 400mV+/-6dB into 150Ω load at 1kHz for 114dB SPL input
  • Mic Frequency Response: 300Hz – 3.5KHz per RTCA DO 214
  • Mic DC Supply Voltage: 8-16V, not polarity sensitive
  • Source Resistance: 470Ω
Additional Features
  • Expanded, super-soft, double foam head pad for comfort.
  • Larger, yet lighter, undercut Comfort Gel ear seals.
  • Universal flex boom for optimal microphone placement.
  • Exclusive M-7A, the most advanced noise-cancelling microphone available.
  • Low-profile volume control knob with detent settings.
See more

Catalog excerpts

H10-13 Y-1

Model H10-13 Y Aviation Headset Headset-Mic, Over-The-Head, Youth Model H10-13 Y / 40411G-04 Data Sheet -► Model H10-13 Y Aviation Headset 0 Expanded, super-soft, double foam head pad 0 Larger, yet lighter, undercut Comfort Gel ear seals 0 Universal flex boom for perfect microphone placement 0 Exclusive M-7A, the most advanced noisecancelling microphone available 0 Low-profile volume control knob with detent settings 0 Molded cord assembly made to exceptional pull and flex standards 0 Certified Noise Reduction Rating - 23 dB 0 A smaller version of the H10-13.4 for younger pilots. This model is upgradeable to the full sized version when needed. 0 Exceeds RTCA/DO-214 Standards 0 Five-year warranty 0 Made in USA 0 FAA TSO Approved C-57b, C58a 360 Franklin Street, Box 15054, Worcester, MA 01615-0054 • Tel: 800-298-6235 • Fax: 508-753-5827 © 2016 David Clark Company Incorporated • Email: [email protected] • Web site: www.davidclark.com Technical data subject to change without prior notice. Current data available at www.davidclark.com

 Open the catalog to page 1

All DAVID CLARK COMPANY INC. catalogs and technical brochures

  1. H20-16

    1  Page

  2. H10-60 H

    1  Page

  3. H10-56

    1  Page

  4. DC ONE-XH

    1  Page

  5. H10-13N

    1  Page

  6. H10-13HXP

    1  Page

  7. H10-13HXL

    1  Page

  8. H10-13H

    1  Page

  9. DC PRO-XP

    1  Page

  10. DC PRO-XA

    1  Page

  11. DC ONE-XP

    1  Page

  12. H10-00

    1  Page

  13. DC ONE-X

    1  Page

  14. H10-30

    1  Page

  15. DC PRO-A

    1  Page

  16. DC PRO

    1  Page

  17. H10-13.4

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.