Cyclone 4006LT
2Pages

{{requestButtons}}

Catalog excerpts

Cyclone 4006LT - 1

4006 LT Ultra High Pressure Runway Rubber and Paint Removal Available with a variable UHP pump to control your water pressure and flow. Cleans into the grooves to extend the time before the next removal is required. Organic materials and particles filter from water to 0.35 microns. Single pass paint removal leaves surfaces clean and dry within minutes. KEY FEATURES AND BENEFITS • ommercial truck chassis: Easy transport between cleaning sites; offsite waste disposal C • leaning head configuration for multiple applications; 34in. (0.86m) wide cleaning path for rubber C removal; adjustable cleaning path for paint removal 6in. (0.15m) to 16in. (0.41m) • resh water tank provides over 2 hours of continuous cleaning F • CD operator interface provides fully computerized control and automated operation for efficient L runway cleaning • oll-up doors provide safe accessibility to the high pressure pump and hydraulic components. R Doors are constructed of noise reducing material • o vacuum means less noise for the operator N HOW IT WORKS • ithin the Cyclone head, up to 24 sapphire-tipped spray nozzles mounted to high speed rotating W arms, blast the surface with ultra-high pressure water • pecially shaped turbine blades, mounted to the arms, create a swirling vortex of air, water, and S loosened rubber or paint at 140 mph – equivalent to a category 4 cyclone storm • s the Cyclone head moves along the surface, the Cyclone vortex provides a secondary cleaning A effect, while simultaneously lifting the waste & water off the surface and whipping it into a small tank mounted on top of the head • high-volume macerator pump further emulsifies and pumps the recovered waste water slurry A into the large 1,000 gallon (3,785 liter) waste recovery tank located at the rear of the vehicle • yclone Technology non-vacuum design means less maintenance and lower annual fuel cost; C resulting in a faster

Open the catalog to page 1
Cyclone 4006LT - 2

Faster, Greener, Cleaner fj^a The Cyclone Difference CYCLONE 4006 HT TECHNICAL SPECIFICATIONS Specifications are subject to change without notice. STANDARD FEATURES • Uses half the water of other UHP solutions providing longer run time • Simple, on-board, gravity based separation of waste from water • Patented vacuum free Cyclone head provides full recovery, less maintenance and better fuel economy • Fresh water filters remove organic material and particles to 0.35 microns • Computer monitoring of the equipment and driver to protect both the surface and machine • Ability to clean markings...

Open the catalog to page 2

All CYCLONE TECHNOLOGY catalogs and technical brochures

  1. BMP-4000RC

    2 Pages

  2. BMG–444SC

    2 Pages

  3. BMG-444

    2 Pages

  4. CY200™

    2 Pages

  5. SK

    2 Pages

  6. CY200UHP

    2 Pages

  7. 4006 ST

    2 Pages

  8. CY210

    2 Pages