Cyclone 4006HT
2Pages

4006 HT Ultra High Pressure Runway Rubber and Paint Removal Available with a variable UHP pump to control your water pressure and flow for different applications. Cleans into the grooves without damage to the runway to extend the time before the next removal is required. Organic materials and particles filtered from water to 0.35 microns. Chemical and vacuum free cleaning removes and recovers rubber and paint build-up in a single pass. • ommercial truck chassis: Easy transport between cleaning sites; offsite waste disposal C • leaning head configuration for multiple applications: 34in. (0.86m) wide cleaning path for rubber C removal; adjustable cleaning path for paint removal 6in. (0.15m) to 16in. (0.41m) • arge fresh water tank provides up to 5 hours of continuous cleaning L • CD operator interface provides fully computerized control and automated operation for efficient L and safe runway cleaning • oll-up doors provide safe accessibility to the high pressure pump and hydraulic components. R Doors are constructed of noise reducing material • o vacuum means less noise for the operator N • ithin the Cyclone head, up to 24 sapphire-tipped spray nozzles, mounted to high speed rotating W arms, blast the surface with ultra-high pressure water • pecially shaped turbine blades, mounted to the arms, create a swirling vortex of air, water, and S loosened rubber or paint at 140 mph — equivalent to a category 4 cyclone storm • s the Cyclone head moves along the surface, the Cyclone vortex provides a secondary cleaning A effect, while simultaneously lifting the waste & water off the surface and whipping it into a small tank mounted on top of the head • high-volume macerator pump further emulsifies and pumps the recovered waste water slurry A into the large 2,000 gallon (7,600 liter) waste recovery tank located at the rear of the vehicle with powered dump for quick and easy service • yclone Technology’s non-vacuum design means less maintenance, lower annual fuel cost; C resulting in a faste

CYCLONE 4006 HT TECHNICAL SPECIFICATIONS Cleaning Head Assembly Removable, joystick controlled, multi-pivot point maneuverability. Cast aluminum housings, hydraulically driven rotation, fiberglass recovery tank. Belt-driven return pump. Each head max work pressure is 40,000 psi (2,700 bar) at 6 gpm (21L/min) Each head has a separate return tank and filtration screen Cleaning Attachment Gas powered, remote paint removal head operates up to 300ft. (91m) distance from the main unit Rubber Removal Head 40in. (1.01m) cast aluminum head with up to 34in. (0.86m) cleaning path Paint Removal Head...