Cyclone 4006AC
2Pages

4006 AC Ultra High Pressure Runway Rubber and Paint Removal Able to dump solid material separate from waste water with a push of a button. The spacious, cab-forward design of the 4006AC provides the best visibility for the operator. The easy to use control panel provides the operator with full control of the machine at the push of a button. Automated controls improve efficiency and allow for safe operation. Able to return the friction coefficient to acceptable levels in a single pass. R unway rubber and airfield paint removal using UHP water and recovery without a vacuum C lean center lines quickly and easily to restore reflectivity and greatly reduce paint costs S pacious operator’s cab with direct visibility to the cleaning head W ater capacity allows for up to 5 hours of continuous operation I nstant recovery without a vacuum reduces fuel consumption by 30% and overall operating cost T he simple design of the automated Cyclone System allows safe and accurate control of the cleaning process HOW IT WORKS • ithin the Cyclone head, up to 24 sapphire-tipped spray nozzles mounted to high speed rotating W arms, blast the surface with ultra-high pressure water • pecially shaped turbine blades, mounted to the arms, create a swirling vortex of air, water, and S loosened rubber or paint at 140 mph — equivalent to a category 4 cyclone storm • s the Cyclone head moves along the surface, the Cyclone vortex provides a secondary cleaning A effect, while simultaneously lifting the waste & water off the surface and whipping it into a small tank mounted on top of the head • high-volume macerator pump further emulsifies and pumps the recovered waste water slurry A into the large 1,000 gallon (3,785 liter) waste recovery tank located at the rear of the vehicle • yclone Technology non-vacuum design means less maintenance and lower annual fuel cost; C resulting in a fast

CYCLONE 4006 AC TECHNICAL SPECIFICATIONS Cleaning Head Assembly Permanently mounted, hydraulically controlled, multi-pivot point maneuverability. Cast aluminum housing, hydraulically driven rotation, fiberglass recovery tank. Belt-driven return pump. Stainless steel ultra high pressure components. Instantaneous recovery Cleaning Attachment Gas powered, remote paint removal head up to 300ft. (91m) distance Rubber Removal Head 40in. (1.01m) cast aluminum head with up to 34in. (0.86m) cleaning path Paint Removal Head 24in. (60.96cm) cast iron with adjustable 6in. (15.24cm) to 16in. (40.64cm)...