video corpo

CY200UHP

CY200UHP

CY200UHP

Product catalog summary
Key Features and Benefits
  • Walk-behind paint removal attachment offers superior maneuverability and efficiency.
  • Operates over 300’ (92m) away from the power unit with removal and recovery in one unit.
  • Utilizes patented Cyclone technology for recovery without suction loss typical of vacuum systems at a distance.
  • Adjustable cleaning path from 6 in (0.15m) to 16 in (0.41m).
  • Self-propelled with four speeds and hand trigger for efficient operation.
How It Works
  • Patented Cyclone head uses sapphire-tipped nozzles on high-speed rotating arms to blast surfaces with ultra-high pressure water.
  • Turbine blades create a vortex of air, water, and material at 140 mph (225km/h) for effective recovery.
  • High-volume pump emulsifies and pumps waste and water for easy disposal.
  • Operates efficiently at 300’ without external vacuum limitations.
Standard Features
  • Low water consumption for effective paint removal.
  • High-volume pump for waste and water recovery over 300’ (92m).
  • Instantaneous recovery with 30% lower fuel cost due to non-vacuum design.
  • Suitable for low clearance areas like parking structures and under jetways.
  • Leaves surfaces clean and dry within minutes.
Technical Specifications
  • Engine: 13 HP (10kw) Honda gasoline engine, with diesel or hydraulic options.
  • Cleaning Head: Lightweight aluminum housing, max pressure 43,500 psi (2,700 bar) at 6 gpm (21L/min).
  • Engine Speed: 2500 RPM with electric, pull, or hydraulic start options.
  • Turning Radius: 0° for unmatched maneuverability.
  • Productivity: Up to 13,000 linear ft² (1200m²).
  • Cleaning Speed: Up to 3.7mph (6km/h) self-propelled.
  • Dimensions: 68” L x 35” W x 42” H (1.72 m L x .89 m W x 1.07 m H).
  • Weight: 410 lbs.
Contact Information
  • Phone: 1.800.335.9695, Tempe Office: 1.480.345.7733
  • Email: [email protected]
  • Website: www.cycloneclean.com
  • Social Media: Facebook and Twitter @cyclonetech
See more

Catalog excerpts

CY200UHP-1

Ultra-high pressure paint line removal, epoxy coating and surface preparation with instant recovery Hand trigger controls the output of the pressurized water to the surface Cyclone Technology’s nonvacuum design uses highvelocity air flow to recover waste water. Cyclone’s quick-change spray bar allows for adjustments to cleaning width from 6” to 16” in under 2 minutes The self-propelled drive system gives the operator consistent and repeatable speeds for any application. • alk-behind paint removal attachment provides superior maneuverability and increased W efficiency • aint removal and surface preparation over 300’ (92m) away from power unit P • emoval and recovery in one unit R • ecovery using patented Cyclone technology, no loss of suction typical of a vacuum R system at a distance of 300’ (92m) • djustable cleaning path for paint removal from 6 in (0.15m) to 16 in (0.41m) A • Self-propelled with four speeds, hand trigger provides efficient operation and ease of use • ithin the patented Cyclone head, a series of sapphire-tipped nozzles are mounted to W high speed rotating arms that blast the surface using ultra-high pressure water • pecially shaped turbine blades, mounted to the arms, create a swirling vortex of air, S water, and loosened paint/material at 140 mph (225km/h). This process lifts all material and water from the surface and forces it into a recovery tank mounted to the cleaning head • high-volume pump emulsifies and pumps the recovered waste and water into a A location of your choice. The used water can be separated from the recovered material for easy disposal • he unique technology of the Cyclone system utilizes instant recovery without the T limitations of an external vacuum system. The CY200UHP can easily operate at a distance of 300’ without compromising the ma

 Open the catalog to page 1
CY200UHP-2

The Cyclone Difference CYCLONE CY200 UHP TECHNICAL SPECIFICATIONS Engine Model Specifications are subject to change without notice. STANDARD FEATURES • Uses a low volume of water to provide effective paint removal with low water consumption • A high volume pump emulsifies and pumps waste water and material over 300' (92 m) • Patented Cyclone head provides instantaneous recovery without an external vacuum which results in 30% lower fuel cost • Low clearance and superior maneuverability allows for paint removal inside most parking structures, under jetways and many hard to reach places • Instantaneous...

 Open the catalog to page 2

All CYCLONE TECHNOLOGY catalogs and technical brochures

  1. SK

    2  Pages

  2. 4006 ST

    2  Pages

  3. CY210

    2  Pages

  4. TR5000/TR5500

    2  Pages

Archived catalogs

  1. BMG-444

    2  Pages

  2. BMP-4000RC

    2  Pages

  3. CY200™

    2  Pages

  4. BMG–444SC

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.