SPIDER-100
20Pages

SPIDER-100 Integrated controller for temperature, humidity, and vibration control. Environmental Testing Solutions

Providing environmental testing solutions. Introducing the Spider-100 Controller The Spider-100 controller by Crystal Instruments is the control engine for environmental test chambers. It is specifically designed for precision temperature/humidity and vibration control. Based on the proven platform of Crystal Instruments Spider vibration controller, the Spider-100 precisely controls all aspects of a combined temperature/ humidity and vibration test regime. The Spider-100 was specially developed for combined temperature, humidity and vibration testing where the device under test (DUT) is...

Output Channels Analog Input Channels 4-20mA Analog Input Channels 4-20mA Analog Output Channels Temperature Input Channels Abort Contact Switch Relay Control Output Isolated Digital Ethernet Input Power Input RS-485 Interface #2: (Digital Amplifier Control) HARDWARE SPECIFICATIONS Analog Input Channels (for vibration measurement) ■ Input Channels: 4 (can be expanded to 8) ■ Connector Type: isolated BNC ■ Coupling: AC Voltage, DC Voltage, Charge, or IEPE (ICP®) ■ IEPE DC offset Voltage and Current: 22 V at 4.7 mA ■ Charge Input: 49000pC and 10000pC ■ Input Range: ±20 Vpk ■ Input...

Power Heater Water Vapor Nitrogen Cooler Chamber Systems & Electro-dynamic Shaker Isolated Digital Input and Output ■ Connector: Two 25-pin female D-SUB ■ External Circuit Power Supply: 24VDC (±10%) ■ Maximum Allowable Distance of Signal Extension: 50 meters Inputs ■ Input Format: Opto-isolated input (compatible with current-sink output) ■ Channels: 24 ■ Input Resistance: 6.1 kQ ■ Input On Current: 2.0 mA or more ■ Input Off Current: 0.16 mA or less Outputs ■ Output Format: opto-isolated input (current sink output) ■ Channels: 8 ■ Output Rating: output voltage 24 VDC max, output current...

Spider-100 Controller Architecture 4 Channels Analog Inputs i ration Digital I/O 24 Bits In / 8 Bits Out Digital Control 4 Channels Analog Inputs i ration 2 Channels Analog Output 8 Channels Analog 4-20 mA Output DAC x 8 30 Bits Relay Control Signals +DC3.3V/1A 10 Channels Analog 4-20 mA Input 8 Channels RTD/Thermocouple Temperature Input RS485-1 (Touch Screen Control Power Management Relay Control Channel ■ Number of Channels: 30 ■ Connector Type: 37 pins D-SUB ( part # 57457844) ■ Output Type: TTL +3.3V compatible control signals and internal +DC3.3V/1.5A power 4-20mA Analog Input ■...

Typical Test Setup Power Amplifier Temperature Sensors Alarm or any ON/OFF Control Electro-dynamic Shaker Compressor Cooling Dehumidification Compressor Heating/Cooling Logic System Specifications ■ On-Board Memory: 4 GB non-volatile flash memory, 32 MB DRAM ■ Ethernet: 100Base-T, RJ45 female connector ■ Internal Clock: maintains date and time ■ Cooling: no cooling fan required Power Specifications ■ Power Supply: external DC power ■ External DC Power: AC adaptor accepts 100 to 240 VAC (50/60 Hz), DC power 15 V (±10%)/3A ■ Power Consumption: 25 watts Environmental and General...

Available EDM Vibration Control System (VCS), Dynamic Signal Analyzer (DSA) Software and Hardware Expansion

Compressor Configuration Settings Temperature/Humidity Control Settings Ease of Use The Spider software is further improved at the user interface level. More graphical guidance, wizards, and tools are available to simplify test setup. The interface has been reformatted to be more intuitive. Event-Action Rules, Abort-Sensitivity, and numerous other new concepts are introduced in the software to simplify operation. Keyword searching through a large number of tests is easy. A smart network detection tool makes hardware installation very simple. Black Box Mode Black Box mode enables Spider...

Temperature Profile T#*t CflflfigpuMtiorti for fUrwieml flC£t3K'fWtS bndurqj IfKP Profile * T«i £afl£gu*dbaM for ftarfciir-'il [££C3K* jVCS fijftdcenlJ ItUt.IHUU MMftm flOHtbngi Humidity Profile Complete Software Solutions The Spiders have complete software solutions available for vibration control, including Sine, RSTD, Oscillator, Random, SoR, RoR, SRoR, Classical Shock, Transient, Seismic, Shock Response Spectrum analysis and SRS Synthesis, Time Waveform Replication, HALT/HASS and multi-drive control. They cover testing to virtually all current environmental test standards....

Analog Input Signal Conditioning Hardware per US Patent 7,302,354 applies two ADCs to each input channel. DSP knows how to pick the data from either A or B path, and “stitch” them together. Digital Output High Precision Front-End Design The Spider analog input channels provide extremely high precision measurements. Each channel has single-ended or differential AC or DC input coupling. It can also provide IEPE (ICPTM) input mode (AC coupling with a 4 mA constant current from a 24 VDC source) for use with industry-standard accelerometers with built-in amplifiers. The ability to read TEDS...

Crystal Instruments EDM (Engineering Data Management) software is designed for a wide range of vibration and shock testing. A Wide Range of Software Functions in Vibration Control and Signal Analysis The Crystal Instruments vibration control system (VCS) software is designed for a wide range of vibration and shock testing customers. The same software suites support from as few as two inputs up to 512 input channels with multiple drive output capability. Software solutions for vibration control include Sine, Resonance Search Track & Dwell (RSTD), Oscillator, Random, Sine-on-Ransom (SoR),...

EDM (Engineering Data Management) is available in English, Japanese, Simplified Chinese, Traditional Chinese, and Russian. Versatile Report Functions The advanced report function allows users to create a report in several formats including OpenOffice, XML, Microsoft Word, ActiveX and PDF. The report is template-based. Users can customize the logo, margins, orientation of the paper, font, and the content. Microsoft Word/ Office is not required to be installed to create reports. In the Review Mode, batch report can generate reports for the signals saved in multiple runs. With ActiveX...