Handheld Ultrasonic Pneumatic Drill

Product catalog summary

Product Overview: The document provides technical specifications and benefits of an ultrasonic drilling system developed by Conprofe Technology Group Co., Ltd. The system is designed for enhanced drilling performance across various materials such as CFRP, GFRP, titanium alloy, stainless steel, superalloy, and aluminum alloy.

Specifications:

Ultrasonic Frequency: 15-40 kHz
Amplitude: 12 μm
Max Speed: 18,500 rpm
Max Power: 230 W
Clamping Range: Φ1-Φ6 mm
Air Pressure: 0.63 Mpa
Operating Voltage: AC220 V
Dimensions: Drill - 179×47×132 mm; Generator - 227×350×107.4 mm

Performance Benefits:

Ultrasonic vibration reduces cutting force and improves chip evacuation, leading to better heat dissipation and lower cutting temperatures.
Significant reduction in tool wear and longer tool life.
Improved hole quality with minimized delamination and fiber pull-out.
Ergonomic design for stable handheld operation and flexibility in limited spaces.

Comparative Analysis:

Tearing Length: Ultrasonic drilling reduces tearing length from 6.51 mm (traditional) to 0.75 mm, an 88% improvement.
Cutting Force: Ultrasonic drilling significantly lowers cutting force compared to traditional methods.

Additional Features:

High drilling perpendicularity with a 9-tier damper.
Effective dust collection system.
Optional ultrasonic vibration with max amplitude of 12 μm and frequency of 15-40 kHz.

Catalog excerpts

Portugal© Ita^r © 4©Tur Spain ; '' Gre^ ^ - long Kong Conprofe Technology Group Co., Ltd. Website: www.conprofecnc.com E-mail: [email protected] Address: No.6, 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C 2024 Conprofe Technology Group Co... Ltd. All Rights Reserved. Empowered by Ultrasonic Drilling The information given is not binding. Actual products and mutual agreement shall prevail. Reprinting of any text and illustrations requires written authorization of Conprofe. Applicable for Composites and Hard-to-Cut Metals Significant Hole Quality Improvement

Open the catalog to page 1

Product Highlights Application CaSG — Carbon Fiber Reinforced Plastic (CFRP) Plate Drilling • Traditional Drilling Fiber pull-out and delamination at the exit hole edges, with a tearing length of 6.51mm Better hole quality with a tearing length of 0.75mm, an improvement of 88% Applicable Materials CFRP, GFRP, Titanium Alloy, Stainless Steel, Superalloy, Aluminum Alloy, etc. Tearing Length (unit: mm) Technical Parameters Item • The periodical separation between the drill bit and the workpiece generated by ultrasonic vibration effectively reduces the cutting force. Better chip breaking and evacuation...

Open the catalog to page 2

Handheld Ultrasonic Pneumatic Drill

Handheld Ultrasonic Pneumatic Drill

Catalog excerpts

All Conprofe Technology Group Co., Ltd. catalogs and technical brochures