Graphite Machining Centers - UPG Series

Product catalog summary

Overview: This document provides technical specifications for the UPG Series machine tools by Conprofe Machine Tool Co., Ltd., a subsidiary of Conprofe Technology Group Co., Ltd. It includes details on travel dimensions, spindle specifications, feed rates, accuracy, tool magazine capacity, and miscellaneous features.

Specifications:

Travel: X/Y/Z-Axis Travel varies across models, with dimensions ranging from 500×400×230 mm to 1700×1200×300 mm.
Spindle: Features include a maximum speed of 30,000 rpm for short-duration and 24,000 rpm for long-duration, with motor power rated at 7.5 kW and torque at 3.4 Nm for certain models.
Feed Rate: X/Y/Z-Axis Rapid Speed and Max. Feed Rate are specified, with rapid speeds up to 24 m/min and max feed rates up to 10 m/min.
Accuracy: Positioning accuracy is 0.003 mm, and repeatability is 0.002 mm.
Tool Magazine: Capacity ranges from 12 to 76 tools, depending on the model, with types including Umbrella and Chain Type.

Miscellaneous:

Power Supply: Three-Phase AC, 380V/50Hz with power capacities ranging from 12 to 33 kVA.
Air Pressure: Required air pressure is 0.5-0.7 MPa with total air consumption over 100 L/min.
Weight and Size: Total weight varies from 3,500 kg to 13,000 kg, with machine sizes ranging from 1,805×1,890×2,350 mm to 4,660×3,350×2,910 mm.
Controller: Options include SIEMENS 828D-280 and HNC 918D.

Standard and Optional Configurations:

Standard features include a centralized automatic lubrication system, spindle chiller, handwheel, and LED work light.
Optional features include a high precision 3D probe, dust collector, 4/5th axis rotary table, and extended tool magazine.

Catalog excerpts

Graphite Machining Centers - UPG Series-1

The information given is not binding. The actual product and mutual agreement shall prevail. Conprofe Machine Tool Co., Ltd. Contact: Esther HU +86-138 2607 9999 Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd. E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C

Open the catalog to page 1

Graphite Machining Centers - UPG Series-2

X/Y/Z-Axis Travel Spindle Nose to Table T-Slot (No.×Width×Distance) Motor Power (Rated) Motor Torque (Rated) Spindle Taper X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Tool Holding Capacity Max. Tool Diameter (Full) Umbrella Type Umbrella Type Power Supply Voltage Power Capacity Total Weight (incl. Accessories) Machine Size (L×W×H) Item Travel Feed Rate Tool Magazine

Open the catalog to page 2

Graphite Machining Centers - UPG Series-3

X/Y/Z-Axis Travel Spindle Nose to Table T-Slot (No.×Width×Distance) Motor Power (Rated) Motor Torque (Rated) Spindle Taper X/Y/Z-Axis Rapid Speed X/Y/Z-Max. Feed Rate X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Tool Holding Capacity Max. Tool Diameter (Full) Chain Type Chain Type Chain Type Power Supply Voltage Power Capacity Total Weight (incl. Accessories) Machine Size (L×W×H) Item Travel Feed Rate Tool Magazine

Open the catalog to page 3

Graphite Machining Centers - UPG Series-4

Standard Configurations Centralized Automatic Lubrication System Spindle Chiller Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision Linear Encoders Optional Configurations High Precision 3D Probe Dust Collector Hand-Held Dust Collector 4/5th Axis Rotary Table Automatic Door Contact Tool Setter Laser Tool Setter Extended Tool Magazine

Open the catalog to page 4

Graphite Machining Centers - UPG Series

Graphite Machining Centers - UPG Series

Catalog excerpts

All Conprofe Technology Group Co., Ltd. catalogs and technical brochures