CIJECT 0
CIJECT 0
- Available in mixed ratios for polyester/vinylester, epoxy, and phenolic systems.
- Compatible with RTM, VRTM, and Resin Infusion processes.
- Features simple and reliable operator control.
- Equipped with purpose-designed A and B component piston pumps that are highly reliable and easy to maintain.
- Includes a fixed automatic injection mix-head and a unique A and B component monitoring system.
- Manually adjustable injection speed with digital pump count readout and pre-settable pump counter with auto-stop.
- Flush alarm provides a timed audible warning after injection, along with a service interval alarm and lockable settings.
- Machine Resin Systems: CIJECT 0 versions for phenolic materials available on request, all versions include a spares kit.
- Standard Options: Polyester and epoxy versions available, including high viscosity options with ball-valve injection mix-heads and optimized resin hoses.
- Machine Upgrades and Ancillaries: Includes IBC connection kits, barrel heaters, injection valves, and flush waste tanks.
- General: Product dimensions are L: 0.73 x W: 0.63 x H: 1.22 m, weight is 60 kg, with a maximum shipping weight of 100 kg. Nominal service is 1 calendar year, and design life is 10 years.
- Mechanical: Injection pressure setting range is -0.9 to +8 bar (G), with a pre-set injection volume of 0.1 - 1000 L or continuously. Injection rate is 0.1 - 8 L/min, dependent on material viscosity.
- Control: Features simple ON/OFF pressure control, programmable injection quantities and speeds, and a pressure sensor type of -1 to +19 bar (G).
- Safety & Monitoring: Includes B component monitoring for low pressure detection, stall alarm, and gel alarm for flushing alerts.
- Power Requirements: Electrical supply is 110 - 230 V AC, 50/60 Hz, 1A, with supply fusing required at 3A and internal fuses at 3.15A.
- Operating Conditions: Maximum resin system temperature is 50°C, operating temperature is 0 - 45°C, storage temperature is 0 - 60°C, humidity is 20 - 75% non-condensing, and noise output is less than 70 dB.
Catalog excerpts
Available with mixed ratios to suit polyester/vinylester, epoxy and phenolic systems. Designed for use with RTM, VRTM and Resin Infusion processes. Simple and reliable operator control. Purpose designed A and B component piston pumps. Highly reiiable and easy to maintain. Fixed automatic injection mix-head. Unique A and B component monitoring system. Manually adjustable injection speed with digital pump count readout. Pre-settable pump counter with auto-stop. Flush alarm which provides timed audible warning after injection. Service interval alarm.
Open the catalog to page 1
MACHINE RESIN SYSTEMS CIJECT 0 versions for use with phenolic materials available on request. All versions include corresponding spares kit. Standard Options Product Number Polyester Version Suitable for typicasl polyester and vinylester resin systems. Epoxy Version Suitable for typical epoxy 2:1 resin systems. Polyester High Viscosity Version Suitable for typical polyester and vinylester resin systems. Includes a ball-valve injection mix-head and optimised resin hoses to accomodate higher viscosity resin systems. Epoxy High Viscosity Version Suitable for typical epoxy 2:1 resin systems. Includes...
Open the catalog to page 2
TECHNICAL SPECIFICATION General Product Dimensions Product Weight Maximum Shipping Weight 100 kg *dependent on shipping options Nominal Service Design Life Mechanical Injection Pressure Setting Range Pre-set Injection Volume Injection Rate 0.1 - 8 L/min *dependent on material viscosity Material Viscosity Range Up to 5000 cPs *for material viscosity above 5000 cPs contact CI Ratio Ranges Control Pressure Simple ON/OFF pressure control Pressure Sensor Type Machine Parameters Programmable injection quantities and speeds Safety & Monitoring B Component Monitoring Stall Alarm Adjustable audible alarm...
Open the catalog to page 3All Composite Integration Ltd catalogs and technical brochures
CIJECT SC42 Pages
CIJECT SC22 Pages
CIJECT 84 Pages
CIJECT 25 Pages